Jump to content

Recommended Posts

I am trying to install power steering on my 67 r600 and have come up with a minor obsticle. the air compressor on the motor doesnt have an rear drive, when i pull the rear covor all i see is a bearing. i am wondering if anyone knows what will interchange and if i need an adaptor or not. the motor is an END707 and the number off the original compressor is 303gb561p1.

any help is greatly appreciated

Link to comment
https://www.bigmacktrucks.com/topic/25789-air-compresor-interchange/
Share on other sites

The rear of the crankshaft should have a slot machined across it and drilled and tapped to hold an adapter. The adapter has a male square that fits in the crankshaft and the other end has female spline drive for the p.s. pump.You will also need a new rear cover to bolt the pump to. Phil Young at Gobal can fix you up with the whole works at a great price.His number is 603-239-7008. Good luck, Steve

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...