cowboy_26_us Posted July 25, 2012 Share Posted July 25, 2012 Hello Everyone,I am new to the forum so here goes!I have a 2000 CX613 with the E7-460 and I am having problems with the engine shutting off while driving. Every time this happens I read the codes with the scanner and get one for low oil pressure. All the fluids are at proper level so I have added a mechanical oil pressure gauge to the truck to make sure that I do have proper oil pressure when this happens and yes I have plenty of oil pressure. So when this happens I replace the sensor and it works fine for about a month and then it starts again. I have gone through about 5 sensors in the last 5 months and I am getting fed up with it since they are not cheap. Can someone please help with some advise on this since I would like to get to the root cause of this and not have to keep on replacing sensors.Thanks, Quote Link to comment https://www.bigmacktrucks.com/topic/26436-truck-shutting-off/ Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.