bluebonnet Posted July 31, 2012 Share Posted July 31, 2012 I need to find a replacement oil filter cartridge for my 58 B 61 with the 711 engine. I have tried all the local parts stores and no luck. Its the large one approx 7 1/2 by 15 inches. Any advice would sure be appreciated. thanks Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/ Share on other sites More sharing options...
Superdog Posted July 31, 2012 Share Posted July 31, 2012 did you try Tyler at Truck Repair? Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131311 Share on other sites More sharing options...
bluebonnet Posted July 31, 2012 Author Share Posted July 31, 2012 Yes, they changed the oil, replaced the pan and valve cover gaskets but came up with a small cartridge. Vince handled this. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131312 Share on other sites More sharing options...
topo Posted July 31, 2012 Share Posted July 31, 2012 dual flow baldwin P706-M $ 29.55 I just put one on my truck Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131313 Share on other sites More sharing options...
Superdog Posted July 31, 2012 Share Posted July 31, 2012 I'm guessing they would have tried H&L Mack and NAPA,but I've had good luck getting odd filters from NAPA.They used that big canister on several engines for years,somebody's gotta still make cartridges. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131314 Share on other sites More sharing options...
bluebonnet Posted July 31, 2012 Author Share Posted July 31, 2012 The small one that truck repair provided was the second one they ordered, I might take it back and see if they want to try the third time. I was planning on taking it to the western Illinois Threshers next Thusday, friday and Sunday and time is running short. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131316 Share on other sites More sharing options...
bluebonnet Posted July 31, 2012 Author Share Posted July 31, 2012 I think O'Reilly handles Baldwin, I will check the P 706 M out tomorrow, Superdog I drive by your place often and I struggle to keep my car from turning in. Thanks all. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131318 Share on other sites More sharing options...
Maddog13407 Posted July 31, 2012 Share Posted July 31, 2012 yup, dual flow, got mine from Napa about 2 months ago. 35 bucks and some change. have them look it up in the book and get the one for dual flow as there is about 3 different 750 lubrifiner filters. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131322 Share on other sites More sharing options...
bluebonnet Posted July 31, 2012 Author Share Posted July 31, 2012 Thanks, This gives me another choice. With a little luck I will find one tomorrow. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131323 Share on other sites More sharing options...
Maddog13407 Posted July 31, 2012 Share Posted July 31, 2012 im pretty sure you need a filter for a 750C lubrifiner Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131330 Share on other sites More sharing options...
theakerstwo Posted July 31, 2012 Share Posted July 31, 2012 It this filter has three lines on the bottom it is a full flow by/pass combnation and mack # is 236GB311AIt has two oil lines on the bottom it is a partion flow oil filter which is luberfinder 500Both can be had at mack or wicks makes them. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131347 Share on other sites More sharing options...
39 Baby Mack Posted July 31, 2012 Share Posted July 31, 2012 The picture shows a full flow/bypass filter- Mack #236GB311A which as stated above crosses to a Baldwin #P706M.It is not interchangeable with a 750 Luberfiner.A 750 Luberfiner does not have gaskets on the top and bottom of it and and a Mack full flow/bypass doesRon Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131360 Share on other sites More sharing options...
Maddog13407 Posted July 31, 2012 Share Posted July 31, 2012 nope, like i said i think its refereed to as a 750C. the regular 750 filter is about 10 bucks, this one is more twards 40. Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131369 Share on other sites More sharing options...
bluebonnet Posted July 31, 2012 Author Share Posted July 31, 2012 I found a Baldwin P 706 M at T.H.E. Company in Mt Pleasant Iowa, about 30 miles from home. They had eight of them in stock. No local companies had anything in stock and would had to order. Its already installed and as soon as the weather cools off I will fire it up to check for leaks, this evening probably. Will drive the B to Hamilton IL for display this Friday thru Sunday. Thanks all for the very good information. Victor Quote Link to comment https://www.bigmacktrucks.com/topic/26537-b-61-oil-filter/#findComment-131437 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.