randl Posted August 22, 2012 Share Posted August 22, 2012 I pulled the bosch injection pump off today to have rebuilt, thought i had it in time when i pulled it but i guess not had to rotate pump to clear gear. how do i put this on top dead to re install pump when it returns from pump shop. ThanksBob Quote Link to comment https://www.bigmacktrucks.com/topic/26942-1990-e7-400/ Share on other sites More sharing options...
staxx Posted August 23, 2012 Share Posted August 23, 2012 Did you set engine/pump in time before you removed it. Quote Link to comment https://www.bigmacktrucks.com/topic/26942-1990-e7-400/#findComment-134595 Share on other sites More sharing options...
randl Posted August 23, 2012 Author Share Posted August 23, 2012 thought i did but when i went to pull the pump i had to turn the pump to get it passed the gear . does the top dead center mark need to be on the motor pointer or the pump pointer when i reinstall the pump. i now i will have to pull the valve cover to bring up compression stroke now. just need to know what pointer to set at. Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/26942-1990-e7-400/#findComment-134685 Share on other sites More sharing options...
staxx Posted August 23, 2012 Share Posted August 23, 2012 On the pump pointer at whatever degree pump sets to need a a/b timing lite to set or high/low pressure time it to set it back on correctly. Quote Link to comment https://www.bigmacktrucks.com/topic/26942-1990-e7-400/#findComment-134688 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.