umodelnut Posted August 24, 2012 Share Posted August 24, 2012 Alright guys, Im REALLY in need of a rear window gaskit. The window Papa and I want to use is thicker than the other glass, so the gaskits are different. Also one is solid, and one has a bead in it. We need the one with the bead. The window is 3/16th's of an inch, and heres a picture of the gaskit. Can anyone help me out??? Quote Link to comment Share on other sites More sharing options...
umodelnut Posted August 24, 2012 Author Share Posted August 24, 2012 Now heres the picture. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted August 24, 2012 Share Posted August 24, 2012 I have purchased that stuff in a roll from Oreillys before, it wasnt very expensive if I remember right it was like $65 a roll and the lock strip roll was $30 then you just cut what you need. 1 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
umodelnut Posted August 24, 2012 Author Share Posted August 24, 2012 I have purchased that stuff in a roll from Oreillys before, it wasnt very expensive if I remember right it was like $65 a roll and the lock strip roll was $30 then you just cut what you need.OK thanks, Do they have a website? Quote Link to comment Share on other sites More sharing options...
umodelnut Posted August 24, 2012 Author Share Posted August 24, 2012 I found the website, but I gotta choose my make and year but theres no 75 Mack, so the oldest Mack you can get is 80, so I clicked that and it brings me to a Midliner, so I click it but theres no results. Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted August 24, 2012 Share Posted August 24, 2012 VinnyGo to a good glass shop in your area and show them what you need, they should be able to help you out.It won't be the whole gasket like the one you have now, it will be in a strip or roll, and you'll have to get the locking rubber separately.When you install it just make sure to put the seam on the bottom.Ron 1 Quote Link to comment Share on other sites More sharing options...
umodelnut Posted August 24, 2012 Author Share Posted August 24, 2012 VinnyGo to a good glass shop in your area and show them what you need, they should be able to help you out.It won't be the whole gasket like the one you have now, it will be in a strip or roll, and you'll have to get the locking rubber separately.When you install it just make sure to put the seam on the bottom.RonAlright thanks Ron. Quote Link to comment Share on other sites More sharing options...
Brocky Posted August 24, 2012 Share Posted August 24, 2012 VinnyIf the glass shops fail, try www.diamondtrubber.comthey are now building rubber products for most all makes.Brocky 1 Quote Brocky Link to comment Share on other sites More sharing options...
umodelnut Posted August 24, 2012 Author Share Posted August 24, 2012 VinnyIf the glass shops fail, try www.diamondtrubber.comthey are now building rubber products for most all makes.BrockyAlright, thanks Brocky. Quote Link to comment Share on other sites More sharing options...
Maddog13407 Posted August 25, 2012 Share Posted August 25, 2012 yup, common gasket that any glass shop should have, yup, put the seam at the bottom and if you paint with any paint that you use clear or high gloss, put some sealant on the pinchweld first! the old B models didnt use any sealant but when u repaint any of these suckers and clear coat anything the gasket wont seal to the pinchweld like it did back in the day when they only had straight or acrylic enamel paint. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted August 25, 2012 Share Posted August 25, 2012 Woops, sorry I didnt get back with you I am busy with my new house and the Superliner, I got my cab suspension fixed up yesterday and looked into my charging issues. I bought it at Oreilly's auto parts they had it in a book and got it for me next day I didnt even think about you not having one near you. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
HeavyGunner Posted August 25, 2012 Share Posted August 25, 2012 Is that diamond rubber co the same guy that posted on here about a year ago telling us that he is making window seals and gaskets for classic trucks? He posted under introduction Vinny if you want to look him up. Quote The problems we face today exist because the people who work for a living are outnumbered by the people who vote for a living.The government can only "give" someone what they first take from another. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.