LAZRGUIRA Posted September 18, 2012 Share Posted September 18, 2012 I have a 1986 superliner that I'm trying to convert or should I say already converted to an Air Ride cab. But Not complete. I bought the whole roller setup only to find out that those rollers will not bolt up to my hood becuase I seem to have a different setup which nobody in the world seems to have seen before. Please tell me what goes here because I really need to put some type of rubber pads or somthing and weld some brkt's to the fire wall so the hood doesn't bounse itself to death. here's what I have. Quote Link to comment Share on other sites More sharing options...
Superdog Posted September 19, 2012 Share Posted September 19, 2012 is your hood for a Superliner 1 or 2 ??? Quote Link to comment Share on other sites More sharing options...
staxx Posted September 19, 2012 Share Posted September 19, 2012 Rollers go on the cab side the hood gets steel guide plate were your bolt in your picture is at 1 Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted September 19, 2012 Share Posted September 19, 2012 He has a superliner 1 ( round lights) Quote Link to comment Share on other sites More sharing options...
LAZRGUIRA Posted September 19, 2012 Author Share Posted September 19, 2012 really? like this? Quote Link to comment Share on other sites More sharing options...
randyp Posted September 19, 2012 Share Posted September 19, 2012 Yes, what staxx said,,,randyp Quote Link to comment Share on other sites More sharing options...
LAZRGUIRA Posted September 19, 2012 Author Share Posted September 19, 2012 ok thanks...I'll see what I can find. Quote Link to comment Share on other sites More sharing options...
rick harper Posted September 19, 2012 Share Posted September 19, 2012 Rollers 55MX26 are available but not cheap. Quote Link to comment Share on other sites More sharing options...
LAZRGUIRA Posted September 19, 2012 Author Share Posted September 19, 2012 The junk yard is currently looking for the Brkts. He also came across this pc. Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted September 19, 2012 Share Posted September 19, 2012 that looks like it would work. looks like a early superliner as I can see the cut rod ends for the "X brace" i was talking about last night. It has the cut out for clutch cable and has the rollers where they should be. now you just need the ramps to mount on the hood.. Quote Link to comment Share on other sites More sharing options...
LAZRGUIRA Posted September 19, 2012 Author Share Posted September 19, 2012 here's The brace thats currently on my truck Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted September 19, 2012 Share Posted September 19, 2012 I think you will be good to go. looks like just swaping the old solid mount bracket out and put the new bracket with the rollers in. then put the ramps on the hood. Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted September 19, 2012 Share Posted September 19, 2012 the only possible issue I can see is that the passenger side may have diffrent ramp locations on the hood . this is depending on the air cleaner locations and cut out of the hood.. on My RS700L I have the twin tube intake and think that the roller on that side extends out slightly farther than the driver side. regardless its adjustable so it should work for you.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.