pamcmahon Posted November 2, 2012 Share Posted November 2, 2012 Looking for the two position head light switch for my 47 85LS fire engine. The knob is a brownish mahogany in color with the word LIGHTS engraved in it. Trying to keep the knob the same as the others. Knob appears to be glued onto the rod, so looking for new or idea to get old knob onto new switch. Quote Link to comment https://www.bigmacktrucks.com/topic/28121-head-light-switch-needed/ Share on other sites More sharing options...
fxfymn Posted November 3, 2012 Share Posted November 3, 2012 It is not terribly hard to take the switch apart. Usually there are four brass tabs that close the switch up; carefully pry them up and pull the phenolic plate off. Be careful there is probably a small spring in there. From there you can either replace the contacts with a board from a new switch or just clean the old contacts. 1 Quote Money, sex, and fire; everybody thinks everyone else is getting more than they are! Link to comment https://www.bigmacktrucks.com/topic/28121-head-light-switch-needed/#findComment-144237 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.