rainierwatts Posted September 9, 2007 Share Posted September 9, 2007 dose anyone know if there is a place to get a rebuild kit for my hydraulic drag link. i tried new o-rings but it is just not right. has anybody had luck geting theres sealed up. any help would be greatthanks dan Quote Link to comment https://www.bigmacktrucks.com/topic/2842-power-steering/ Share on other sites More sharing options...
Rob Posted September 9, 2007 Share Posted September 9, 2007 dose anyone know if there is a place to get a rebuild kit for my hydraulic drag link. i tried new o-rings but it is just not right. has anybody had luck geting theres sealed up. any help would be greatthanks danHi Dan, what type of steering is it, Garrison, Ross, Vickers?? Upon replacing the "O" rings, did you notice any scratches or gouges in the bore or the piston? Were any springs and check valves in decent shape and work freely? Trash in the system is a big culprit that leads to failure.I'm assuming your truck is either a "B" or early "R" series. I haven't seen a good rebuild kit for these drag links in years, but they are not hard to put together from off the shelf parts. I bored, and sleeved one of mine but have not used it yet.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment https://www.bigmacktrucks.com/topic/2842-power-steering/#findComment-13842 Share on other sites More sharing options...
rainierwatts Posted September 9, 2007 Author Share Posted September 9, 2007 Its a factory install on my B61LT. I will have to take it a part and look at it one more time, and look at the springs and valvesthanks Dan Quote Link to comment https://www.bigmacktrucks.com/topic/2842-power-steering/#findComment-13844 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.