super9 Posted November 22, 2012 Share Posted November 22, 2012 I have an E9 500 in a 88 Superliner gravel truck that's super strong. Probably the strongest gravel truck in the area. And I guess I was wondering if Mack engines ever found there way into Paccar's etc? For what it's worth I have a 3408 in an old Pete and it's quite strong, but it's in a highway tractor with appropriate gearing. While my Superliner is vocationally spec'd. We all know you could get a Cat, Cummins or Detroit in a Mack. I was just wondering if any Manufacturers offered Mack engines as an option? Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/ Share on other sites More sharing options...
staxx Posted November 22, 2012 Share Posted November 22, 2012 Have seen e9 in tug boats before . Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147336 Share on other sites More sharing options...
mack mhe9 Posted November 22, 2012 Share Posted November 22, 2012 hack trucks only, they had industrlial and marina apps, military also, but know paccar prod. and if you want to put and e9 in something the parts are getting harder to get, Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147337 Share on other sites More sharing options...
mack mhe9 Posted November 22, 2012 Share Posted November 22, 2012 hack, opps ment MACK Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147338 Share on other sites More sharing options...
staxx Posted November 22, 2012 Share Posted November 22, 2012 yup seen pics of e9 in tanks too. Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147339 Share on other sites More sharing options...
1958 F.W.D. Posted November 22, 2012 Share Posted November 22, 2012 Simon-Duplex, a fire chassis builder experimented with Mack drivelines, three or four were made, but it never took off. A shame because many fire departments, especially in the Pa, area where Mack was a stronghold for years would have bought them. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147340 Share on other sites More sharing options...
bulldogboy Posted November 22, 2012 Share Posted November 22, 2012 Pemfab, a custom fire truck chassis manufacturer, used Mack engines in a some of its vehicles. I think that the president of Pemfab worked for the Mack fire apparatus division at one time. They are now out of business. bulldogboy Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147341 Share on other sites More sharing options...
bullhusk Posted November 22, 2012 Share Posted November 22, 2012 When I was a kid, my dad put a 673 Mack diesel drive train (dup. push pull) in a 50's 260 Brockway. The brock had a big Con. gas motor 572? with a two speed rear, he locked the rear in high range, and the truck ran fine!! He loved the Brockways but had oil press. prob's with the big Brockway Continental's he always liked the Mack 707'sBULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147348 Share on other sites More sharing options...
mackdaddy Posted November 22, 2012 Share Posted November 22, 2012 knew of a guy that put an E-9 in a Powerliner (Freightliner) he called it a ....................FRACK 2 Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147349 Share on other sites More sharing options...
jakebrake86 Posted November 22, 2012 Share Posted November 22, 2012 There's a construction company here in town that's infamous for repowering trucks and equipment with whatever's laying around in the boneyard. They have an EL 240 Cat hoe with a 671 Detroit power unit out of a northwest dragline, a 200 Komatsu with a John Deere motor, but my favorite has to be the mid 80's White-GMC with a 237 Maxidyne. Redneck ingenuity at its best! Quote Jake Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147351 Share on other sites More sharing options...
Superdog Posted November 22, 2012 Share Posted November 22, 2012 Years ago,I was at an auction with Grandpa and there was a 110" cab Pete glider kit built with a 325 V8 Mack,5 speed and Mack rears on Camelback. Friend of mine from AZ sent me pics of a Bubblenose Freightliner with complete Mack drivetrain,673,Triplex,and Mack rears.Also, a friend of mine's uncle kitted some of the early White/GMC's with components from F models. Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147353 Share on other sites More sharing options...
Speed Posted November 22, 2012 Share Posted November 22, 2012 Well,that gets me thinkin';I have a spare Mack REO gas motor and 5 speed from an E school bus sitting around-what could I install IT in? Maybe an old GMC 2 ton? (Not my '54,it still runs too good.) Speed Quote "Remember-ANY Gun Control is Unconstitutional!"<!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><i><b>MACK-E Model Registry # 36</b></i><!--sizec--></span><!--/sizec--><a href="http://www.nvabatetravel.com/"target="_blank">http://www.nvabatetravel.com/</a> Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147361 Share on other sites More sharing options...
Superdog Posted November 22, 2012 Share Posted November 22, 2012 Well,that gets me thinkin';I have a spare Mack REO gas motor and 5 speed from an E school bus sitting around-what could I install IT in? Maybe an old GMC 2 ton? (Not my '54,it still runs too good.) Speed Mack REO? Are you sure it's not a REO engine that was fitted into the Mack.I know army surplus White halftrack engines were a very popular re-power back in the day,cheap & plentiful. Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147364 Share on other sites More sharing options...
Speed Posted November 22, 2012 Share Posted November 22, 2012 Of course you're right-I wasn't clear on my meaning. This engine is marked REO,but has the same ID number as the bus had,so it must have been a retro-fit. It's also marked as a 354 C.I. engine. What I've read so far shows thew 5 speed is a direct 5th model. (Bummer) I'm thinking if I find a 2 ton truck with a dead engine or without an engine,this might make an interesting swap. I still have the radiator,so if I can make room for it the only serious mods will be throttle linkage,exhaust,clutch linkage and the u-joint/front drive line section. Sure-there's a LOT of engines that'd be easier to install in a GM truck,but THIS would have CHARACTER! (Also about twice the torque of a GMC 302 or a small block Chevy.) The question,which I think I already know the answer to,is would this engine/trans. be too heavy for a 1-1/2 or 2 Ton truck? Speed Quote "Remember-ANY Gun Control is Unconstitutional!"<!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><i><b>MACK-E Model Registry # 36</b></i><!--sizec--></span><!--/sizec--><a href="http://www.nvabatetravel.com/"target="_blank">http://www.nvabatetravel.com/</a> Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147368 Share on other sites More sharing options...
bulldogboy Posted November 22, 2012 Share Posted November 22, 2012 REO built the Mack Jr. models. Did Mack supply the engines or did these models have REO engines? Just wondering. bulldogboy Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147383 Share on other sites More sharing options...
b61mack Posted November 22, 2012 Share Posted November 22, 2012 Stanley Young from Maine has a IH KB12 with a 237 and a 12 speed Mack in it, he always makes it to Macungie every year. Ron Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147385 Share on other sites More sharing options...
bullhusk Posted November 22, 2012 Share Posted November 22, 2012 Reo had the Gold Comet engine that they called 'the Zero engine' cause the bore and stroke were the same, it was a dam good motor until they started putting it into trucks over 40,000 GVW, they would just over rev and blow apartBULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147404 Share on other sites More sharing options...
BOB DINGSDALE Posted November 22, 2012 Share Posted November 22, 2012 B61Mack:Is Stan Young still with us.Haven't heard from him in a few years.Say hello to him from me when yuo see him next .We put E9s @500hp and Mack 12 speeds in Pacific's,Challender's,Hayes's off-high-way trucks out here and they worked out really good.Beat out all others in fuel economy.Some evan had the 6061 Allisson trans behide them. Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147409 Share on other sites More sharing options...
rsb502 Posted November 22, 2012 Share Posted November 22, 2012 I have alway thought of putting an old mack E5 Midliner engine in a pickup Im just scared about the parts availability but you can get the 6 liter version pretty cheap considering and it says Mack on the data plate(renault on the block). Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147410 Share on other sites More sharing options...
maxidyne237 Posted November 22, 2012 Share Posted November 22, 2012 Notice the Bulldog on the hood and no red oval on the grill.Jeff Tripp out of Jackson, NJ, runs a Pete 379 daycab tractor that was built as a glider with an E9-500 under the hood. The truck pulls an Alumatech dump trailer and is a common sight here in NJ.Here is a pic from Flickr...-John 1 Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147420 Share on other sites More sharing options...
b61mack Posted November 22, 2012 Share Posted November 22, 2012 B61Mack:Is Stan Young still with us.Haven't heard from him in a few years.Say hello to him from me when yuo see him next .We put E9s @500hp and Mack 12 speeds in Pacific's,Challender's,Hayes's off-high-way trucks out here and they worked out really good.Beat out all others in fuel economy.Some evan had the 6061 Allisson trans behide them. Bob the only time i see him is at Macungie, he must be doing good he drives the KB 12 down every year. his son follows him down incase he has trouble. when i see him again i will tell him you said hello. Ron Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147428 Share on other sites More sharing options...
mackdaddy Posted November 22, 2012 Share Posted November 22, 2012 The Mack Jr's and as well as the same REO's were continental engines. REO had Silver Nickel cast into the blocks but they were Continentals. when i restored the Mack Jr in 95 I went to Napa and got a complete rebuild kit as the same engines were used for years in forklifts. Quote Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147431 Share on other sites More sharing options...
57 bcr Posted November 23, 2012 Share Posted November 23, 2012 In the mid '70's,a magazine called "Truck Tracks" featured a W 900 glider kit that was working for Sea-Land on the Alaska Pipeline,that had been built with a 325 Maxidyne V-8 in it.If I remember right,the guy bought all brand new components to do it! Quote IF YOU BOUGHT IT, A TRUCK BROUGHT IT..AND WHEN YOU'RE DONE WITH IT, A TRUCK WILL HAUL IT AWAY!!! Big John Trimble,WRVA Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147514 Share on other sites More sharing options...
vision386 Posted November 23, 2012 Share Posted November 23, 2012 Don't know if this counts,but years ago when i started at Atlas Van Lines,we had an owner-operator with a W-series Ford cab on a single axle F-model chassis with a 237/5 speed (a tree fell on the F-model,and the cab was beyond repair,the ford cab was cheaper to replace then the Mack at the time)................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/28489-mack-engines-in-non-macks/#findComment-147519 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.