Jump to content

Recommended Posts

only two ports not a check valve does not hold air in ether direction but seems to limit the air a little when air is put in the direction it was installed does have an arrow took valve apart has big long spring metal disk and in the bottom there is another chamber with a metal ball this valve is in the line from the bake valve to the relay valve for rear brakes this trk does not have front brakes

Link to comment
https://www.bigmacktrucks.com/topic/28603-unkown-air-valve/#findComment-148659
Share on other sites

Hmmmmmmmm.........

I have looked through all of my airbrake catalogs and diagrams, there are not many devices with only two ports that are not check valves!

It could be a ratio valve, which is designed to reduce pressure to the front brakes, if so it should NOT be in the line to the rear brakes.

A relay valve needs full pressure from the pedal...is there a place on it for a wire? It may be a brake light switch?

If it aint either of these you stumped me!

Link to comment
https://www.bigmacktrucks.com/topic/28603-unkown-air-valve/#findComment-148665
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...