dds92780 Posted January 1, 2013 Share Posted January 1, 2013 So i have to work tomorrow and i am i the dump business. I knew that i was going to need a hudson sprayer or some sort of sprayer so i go out to farm and fleet and buy a hudson sprayer. I spent forever trying to figure out how to install it. Even went on youtube. Then after careful examination i was missing a vital part. I then went to menards and bought an offbrand Chapin i think. I get it home and its allready installed just put the top on and go. That was easy wasnt it? So i go in the garage and i proceed to mix a gallon of water with a bunch of cups full of calcium chloride flakes i bought last year and i mixed it with a painting stick used to stir paint, got the mixture good to go, put the sprayer in a 2-3 gallon bucket, attatched bungee cords , leaving it all outside and i hope to have a great day tomorrow I used to use vegetable oil, vegetable spray etc . Took me three years to get the picture lol Quote Slow and Steady Wins the Race! Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/ Share on other sites More sharing options...
hatcity Posted January 2, 2013 Share Posted January 2, 2013 I don't get it. You made salt water? What for?We just drive about 2 miles and can get BILLIONS of gallons of salt waterHeard them people from the land of lincoln can be strange Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154695 Share on other sites More sharing options...
storkmack Posted January 2, 2013 Share Posted January 2, 2013 So i have to work tomorrow and i am i the dump business. I knew that i was going to need a hudson sprayer or some sort of sprayer so i go out to farm and fleet and buy a hudson sprayer. I spent forever trying to figure out how to install it. Even went on youtube. Then after careful examination i was missing a vital part. I then went to menards and bought an offbrand Chapin i think. I get it home and its allready installed just put the top on and go. That was easy wasnt it? So i go in the garage and i proceed to mix a gallon of water with a bunch of cups full of calcium chloride flakes i bought last year and i mixed it with a painting stick used to stir paint, got the mixture good to go, put the sprayer in a 2-3 gallon bucket, attatched bungee cords , leaving it all outside and i hope to have a great day tomorrow I used to use vegetable oil, vegetable spray etc . Took me three years to get the picture lolWe made a 55 gallon drum batch of "Chloride" once that was lil' strong. The damn drum got so hot you couldn't touch it. Sat it outside untill it calmed down. -BradPs. Those sprayers are always a pain in the ass. Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154702 Share on other sites More sharing options...
Vladislav Posted January 2, 2013 Share Posted January 2, 2013 I don't understand for what a reason the sprayer is?I'm shure I read all good and recognized most words but haven't learned the matter.Vlad Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154766 Share on other sites More sharing options...
Freightrain Posted January 2, 2013 Share Posted January 2, 2013 Vlad, you spray the interior of the bed to keep material from freezing to bedsides while in transport. Makes things slide out when you dump. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154769 Share on other sites More sharing options...
Vladislav Posted January 2, 2013 Share Posted January 2, 2013 Thank you Larry, it was on my mind but without any shure.Most local dumps have heated body with exhaust passes in a flore. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154771 Share on other sites More sharing options...
Popular Post Lmackattack Posted January 2, 2013 Popular Post Share Posted January 2, 2013 I normaly just drink straight Jameson and the next day when I take a dump it will slide ........never mind.... 3 Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154773 Share on other sites More sharing options...
thomastractorsvc Posted January 2, 2013 Share Posted January 2, 2013 is that stuff called "hot sauce" I know that stuff makes stuff slide out??? 1 Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154774 Share on other sites More sharing options...
Freightrain Posted January 2, 2013 Share Posted January 2, 2013 will also make things sliiiiiiiiide on out. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154792 Share on other sites More sharing options...
other dog Posted January 3, 2013 Share Posted January 3, 2013 we weren't supposed to, but sometimes we'd put diesel fuel in a sprayer and spray the inside walls on chip trailers so the chips would come out when they were frozen. It was either that, or get up in there and dig them loose with a grubbing hoe. I brought about 5 tons of chips back to the woodyard that was frozen in the van one time. Payed less of course, but better than me having a heart attack trying to dig out frozen wood chips. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154818 Share on other sites More sharing options...
Apple dog Posted January 3, 2013 Share Posted January 3, 2013 we weren't supposed to, but sometimes we'd put diesel fuel in a sprayer and spray the inside walls on chip trailers so the chips would come out when they were frozen. It was either that, or get up in there and dig them loose with a grubbing hoe. I brought about 5 tons of chips back to the woodyard that was frozen in the van one time. Payed less of course, but better than me having a heart attack trying to dig out frozen wood chips.Back when I hauled chips and sawdust from the saw mill we had the motto that; what don't slide will ride. The mill foreman didn't think much of it but I was not digging his chippys and sawdust out of the trailer. We got paid by the trip so it didn't bother us. 1 Quote This is Mack country. On a quiet night you can hear a peterbilt rust away. Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154822 Share on other sites More sharing options...
other dog Posted January 3, 2013 Share Posted January 3, 2013 Back when I hauled chips and sawdust from the saw mill we had the motto that; what don't slide will ride. The mill foreman didn't think much of it but I was not digging his chippys and sawdust out of the trailer. We got paid by the trip so it didn't bother us.did you haul to Covington or Luke for Westvaco? Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154827 Share on other sites More sharing options...
Lmackattack Posted January 3, 2013 Share Posted January 3, 2013 Diesel in the box... Oh my...that's a big no no!.... I never did that. Wink,wink... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154842 Share on other sites More sharing options...
hatcity Posted January 3, 2013 Share Posted January 3, 2013 Used to splash diesel in the box when hauling asphalt. Now, some kind of "soap" stuff they call it.Worked like shit.don't need to worry about that lately Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154845 Share on other sites More sharing options...
dds92780 Posted January 3, 2013 Author Share Posted January 3, 2013 So i went to use it this morning and the hose attatchment was frozen. i had to take it inside and let the hose sit in the bathtub with warm water lol. 5 mins later hooked her back up. sprayed it all down, not one thing got stuck in the box today I got home and made the solution even stronger and sprayed for a few mins to hopefully prevent the hose from freezing. Before i put it away i relieved all the pressure too Quote Slow and Steady Wins the Race! Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154849 Share on other sites More sharing options...
Maddog13407 Posted January 3, 2013 Share Posted January 3, 2013 wow, EVERYONE up here in Ny sprays Diesel in the box haulin asphalt when no one is looking. haha shhhhhhhh Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154851 Share on other sites More sharing options...
Lmackattack Posted January 3, 2013 Share Posted January 3, 2013 When we were hauling clay in the winter I would get to the yard at the end of the day,fuel the truck up and then I would spray about a gallon in the box. The next day would go flawless. I had a little pump sprayer with fuel in it that I used for the sides and hoist house in the nose. About mid day I would spray the sides to keep it wet and that box would stay an ice rink all winter long. Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154857 Share on other sites More sharing options...
rsb502 Posted January 3, 2013 Share Posted January 3, 2013 Diesel fuel in a dump bed? My lord what has the world come to? I'm calling my local EPA office right now! The same office that came to the asphalt plant and shut us all down (bout 20 trucks and the plant) till we cleaned up the diesel contamination and started using EPA approved asphalt release agent at $10/gal of course if you dilute it with about 4gallons of diesel it worked better! 2 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154862 Share on other sites More sharing options...
Apple dog Posted January 3, 2013 Share Posted January 3, 2013 did you haul to Covington or Luke for Westvaco?Both of them. Chippys from Riverton WV went to Stinky City (Covington) and Luke MD. The sawdust from MT Storm and Riverton went to Parsons WV. Quote This is Mack country. On a quiet night you can hear a peterbilt rust away. Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154867 Share on other sites More sharing options...
mike69mackman Posted January 3, 2013 Share Posted January 3, 2013 I used to spray diesel in the bed when I drove dump trucks for hempt bros years ago. Penndot inspectors frowned at that but didnt say a whole lot. Tried a solution of dawn dish detergent and water a few times, didnt work as good as diesel. Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154888 Share on other sites More sharing options...
farmer52 Posted January 3, 2013 Share Posted January 3, 2013 So i went to use it this morning and the hose attatchment was frozen. i had to take it inside and let the hose sit in the bathtub with warm water lol. Before i put it away i relieved all the pressure too Hmmm, sounds like a personal problem to me! 1 Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154894 Share on other sites More sharing options...
Vladislav Posted January 3, 2013 Share Posted January 3, 2013 When I read in some ads about dump trucks for sale and their bodies rotted through and gone off I was surprized. Solid metal dump bodies...Salt water is perfect to make the effect! Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154899 Share on other sites More sharing options...
fifth wheel Posted January 3, 2013 Share Posted January 3, 2013 I have used a few different things on unlined bodies.diesel fuel good for just about everythingmop and glo (floor wax) for snowsolution of rock salt and H20 gravel, stone, dirtcalcium chloride is bad, I don't useFW Quote Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154904 Share on other sites More sharing options...
dds92780 Posted January 3, 2013 Author Share Posted January 3, 2013 well i could use diesel if that is better. i have seen some guys do that Quote Slow and Steady Wins the Race! Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154905 Share on other sites More sharing options...
other dog Posted January 3, 2013 Share Posted January 3, 2013 Both of them. Chippys from Riverton WV went to Stinky City (Covington) and Luke MD. The sawdust from MT Storm and Riverton went to Parsons WV. I might have seen you there. H.H. Moore was a contract carrier for Westvaco for years and years. I hauled many,many loads of chips to Covington from Dillwyn and Howardsville in the '80's, then we started hauling long wood. We hauled the pulpwood from the new yard on rt. 60 in Buckingham about 5 or 6 miles west of Mt. Rush. Hauled mainly to Covington, went to Luke when there was too much snow in western Maryland for the locals to work in the woods, took the logs to GP in Emporia.I liked hauling pulpwood, if you didn't have a load going up the road- like my case now- you could always go to the woodyard and run a load or 2 of wood to Covington. I liked to just stay there and haul wood all the time.They got rid of most of the chip vans and got log trailers when they switched from chipping at the woodyard to hauling the wood to the mill. Then Westvaco went back to wanting chips, and opened a new chip mill north of Dillwyn on rt. 15, so Larry Moore didn't want to get a bunch of chip trailers again, sold the log trailers, and quit fooling with forest products. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment https://www.bigmacktrucks.com/topic/29132-made-my-first-batch/#findComment-154908 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.