j hancock Posted February 2, 2013 Share Posted February 2, 2013 When I was about 10 years old (long time ago now), I had the chance to do a ride along with a cable D-7. The contractor was putting in a new road on a development for my Dad and I was being a sidewalk supervisor. The operator called me over and asked if I wanted to watch from the best seat in the house. So, I spent the rest of the afternoon on the machine as the road was cut.Pretty good deal for this kid! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161318 Share on other sites More sharing options...
farmer52 Posted February 2, 2013 Share Posted February 2, 2013 Leslie...nice vids. My JD 730 tractor has a 4cyl. pony starting engine. Start the pony engine, pull decompession lever, engage pony to main engine, let it build oil pressure, close decompession lever, let the main engine turn over a few times, give the main engine fuel, and off you go. Sounds similar to the vids except...PUTT PUTT PUTT... Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161322 Share on other sites More sharing options...
leversole Posted February 2, 2013 Share Posted February 2, 2013 Action starts at 3:48...lots of cool info...Ken, you oughta post a video of yours starting! Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161326 Share on other sites More sharing options...
farmer52 Posted February 2, 2013 Share Posted February 2, 2013 Action starts at 3:48...lots of cool info...Ken, you oughta post a video of yours starting! Yep, that be it! I will if I ever get it running again. Pony engine carb being rebuilt (a second time). On my long list of "stuff I need to do but too lazy to do". Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161348 Share on other sites More sharing options...
randyp Posted February 2, 2013 Share Posted February 2, 2013 I have run some of that old stuff, and i think i worked harder pulling levers and concentrating and anticipating terrain and working legs than I would have ifn I had just climbed off, got me a rake and hoe and shovel and did it by hand. Im not making fun of them, I love em, but sure is hard work and a big difference to the equipment today. randyp Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161385 Share on other sites More sharing options...
bullhusk Posted February 3, 2013 Share Posted February 3, 2013 My TD-15 Great Machine 1 Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161420 Share on other sites More sharing options...
bullhusk Posted February 3, 2013 Share Posted February 3, 2013 Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161423 Share on other sites More sharing options...
jakebrake86 Posted February 3, 2013 Author Share Posted February 3, 2013 I have run some of that old stuff, and i think i worked harder pulling levers and concentrating and anticipating terrain and working legs than I would have ifn I had just climbed off, got me a rake and hoe and shovel and did it by hand. Im not making fun of them, I love em, but sure is hard work and a big difference to the equipment today. randypYep, you definitely get a good day's exercise in on a direct drive machine. I've put in a few hours on them and loved it. My next goal is to learn to run a dragline... Just haven't had the opportunity yet. Quote Jake Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161464 Share on other sites More sharing options...
randyp Posted February 4, 2013 Share Posted February 4, 2013 Yep, you definitely get a good day's exercise in on a direct drive machine. I've put in a few hours on them and loved it. My next goal is to learn to run a dragline... Just haven't had the opportunity yet.I did actually get to dig and dump 5 buckets on big giant B&E dragline one night on the graveyard shift with no big bosses around. Operator was so nervous bout it, thas all he let me have. I understand his concern though, boom as long as a football field, 120 yard bucket, any screwups going on him. They are very simple to operate though. However, one mistake can cost millions. randyp 1 Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161711 Share on other sites More sharing options...
jakebrake86 Posted February 4, 2013 Author Share Posted February 4, 2013 I did actually get to dig and dump 5 buckets on big giant B&E dragline one night on the graveyard shift with no big bosses around. Operator was so nervous bout it, thas all he let me have. I understand his concern though, boom as long as a football field, 120 yard bucket, any screwups going on him. They are very simple to operate though. However, one mistake can cost millions. randypMan, that would be something! Gonna have to put that on my bucket list. 1 Quote Jake Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161770 Share on other sites More sharing options...
randyp Posted February 4, 2013 Share Posted February 4, 2013 Man, that would be something! Gonna have to put that on my bucket list.heh heh,,bucket list,,thas a good one,,,bucket, list LOL,,, 1 Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161814 Share on other sites More sharing options...
41chevy Posted February 4, 2013 Share Posted February 4, 2013 here are some pic of my old Cats.Mike the little Cat pic of your is the same one in my avatar...it holds my mail box at the end of my driveway.My uncle swore by the pony motor and cables. He always said no batteries to get stolen or go dead. He never like hydraulics. Said if the hydraulics go your down for the count. Break a cable and you can shorten it up or splice it and keep working. Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161861 Share on other sites More sharing options...
bullhusk Posted February 4, 2013 Share Posted February 4, 2013 Mike the little Cat pic of your is the same one in my avatar...it holds my mail box at the end of my driveway.My uncle swore by the pony motor and cables. He always said no batteries to get stolen or go dead. He never like hydraulics. Said if the hydraulics go your down for the count. Break a cable and you can shorten it up or splice it and keep working. PaulMy uncle felt the same way about the cable blade, but on the other hand he hated Cat machines and loved the TD-24's I know I know!! 24volts to start on gas, and a shelf full of new or reman cyl heads! (anyone with a TD-24 had cracked heads or was gonna have a cracked head!) But the old D-8's would not push the heavy NY transfer trailer loads (you dumped per yd not wt) Those push out trailer's from Mt Vernon NY would dump there load an it would sink into the garbage! The IH 24's with the 2 speed steering could cut the load in half without loosing power to the track. Then came the TD-25 and today is still my fav.BULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-161868 Share on other sites More sharing options...
Popular Post fifth wheel Posted February 5, 2013 Popular Post Share Posted February 5, 2013 When I was about 10 years old (long time ago now), I had the chance to do a ride along with a cable D-7. The contractor was putting in a new road on a development for my Dad and I was being a sidewalk supervisor. The operator called me over and asked if I wanted to watch from the best seat in the house. So, I spent the rest of the afternoon on the machine as the road was cut.Pretty good deal for this kid!These pictures were take 1983 , Me and my stepson. Still have the machine, D7 -3T series. At a time when you could burn. One of the few machines with a bench seat. 3 Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162045 Share on other sites More sharing options...
bullhusk Posted February 6, 2013 Share Posted February 6, 2013 wow, very nice machine! Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162220 Share on other sites More sharing options...
bullhusk Posted February 6, 2013 Share Posted February 6, 2013 wow, very nice machine! Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162221 Share on other sites More sharing options...
GreenGiant2 Posted February 6, 2013 Share Posted February 6, 2013 bullhusk, nice ride, spent alot of time on a 15c. with a straight pipe and 2nd gear you could move alot of dirt. what year is yours. i have a winch here still that would bolt right on to your machine. controls and all. ypu got the 466 or 505 engine.gg2 Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162231 Share on other sites More sharing options...
bullhusk Posted February 6, 2013 Share Posted February 6, 2013 bullhusk, nice ride, spent alot of time on a 15c. with a straight pipe and 2nd gear you could move alot of dirt. what year is yours. i have a winch here still that would bolt right on to your machine. controls and all. ypu got the 466 or 505 engine.gg2Thanks! I think it's a 1984? I bought it from the orig. owner, he rebuilt the motor (DT-466) and just put a new Berco UC under herBULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162334 Share on other sites More sharing options...
realwolfdaddy Posted February 6, 2013 Share Posted February 6, 2013 I own a d7e that i wish was pony start now. Two new Caterpillar 8d batterys two new 4/0 battery cables one new solenoid engine still cranking over slowly. guess 500.00 starter next? hugh Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162338 Share on other sites More sharing options...
bullhusk Posted February 7, 2013 Share Posted February 7, 2013 I own a d7e that i wish was pony start now. Two new Caterpillar 8d batterys two new 4/0 battery cables one new solenoid engine still cranking over slowly. guess 500.00 starter next? hughIs it a 24V starter or 12V ? If it's 24V just make sure the Bat.'s are hooked up cor.BULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162498 Share on other sites More sharing options...
GreenGiant2 Posted February 7, 2013 Share Posted February 7, 2013 Thanks! I think it's a 1984? I bought it from the orig. owner, he rebuilt the motor (DT-466) and just put a new Berco UC under herBULLHUSKmake sure you run her good and get those new tracks broke in, cause if you dont you will get some real stiff links. no pun intended Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162500 Share on other sites More sharing options...
Jamied625 Posted February 7, 2013 Share Posted February 7, 2013 can you still get parts for those from cat or do you have to dig around in tractor slavage yards?? Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162506 Share on other sites More sharing options...
41chevy Posted February 7, 2013 Share Posted February 7, 2013 can you still get parts for those from cat or do you have to dig around in tractor slavage yards??When my mail box holder was still operational, I got parts from here, Some new surplus some remans and some good used. they're in Illinois .http://parts.cat.com/parts/surplus-used Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162556 Share on other sites More sharing options...
bullhusk Posted February 7, 2013 Share Posted February 7, 2013 Yes, I have encountered that already! They are not S.A.L.T. tracks so I know what you mean, I do like the 2 speed trans, it does make a world of diff. over the other machines BULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162570 Share on other sites More sharing options...
bullhusk Posted February 7, 2013 Share Posted February 7, 2013 Yes, I have encountered that already! They are not S.A.L.T. tracks so I know what you mean, I do like the 2 speed trans, it does make a world of diff. over the other machines BULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/29730-1962-caterpillar-d6b-restoration/page/2/#findComment-162571 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.