Giovanni Croeze Posted February 6, 2013 Share Posted February 6, 2013 Hello everyone,I am looking to purchase a 1960s B61 Thermodyne. It has tandem axles, quadruplex tranny (18 speed) and a full size 14 foot steel bed. I was wonder if you guys can give me idea of how much it weights?The other issue is my trailer: its a single axle 15 ton lowboy trailer with a 20 ft long flat area. The dump truck is 26 ft long I think I can rig something and get it to work. However, how is the weight distribution of the dump truck? How should I load it to get the most weight on the tongue? Thank you, Gio Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/ Share on other sites More sharing options...
rsb502 Posted February 6, 2013 Share Posted February 6, 2013 Id like to say I can help ya but theres not enough info there to tell you much, I have no idea what it weighs, ius it double frame? triple?, does it have 52,000rears? I am lost on the lowboy thing too, I am picturing a lowboy triler with a king pin that goes behind a tractor, are you asking if you can add a fifth wheel and remove the bed? Im kinda lost here. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162222 Share on other sites More sharing options...
2stacksuperdog Posted February 6, 2013 Share Posted February 6, 2013 I think he wants to put the truck on his lowboy. I think the lowboy hes talking about is one of those old style ones with the tires across the back Quote Matt Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162223 Share on other sites More sharing options...
Gmerrill0516 Posted February 6, 2013 Share Posted February 6, 2013 It's hard to see but I think the axle bearing caps have 8 bolts and I think that means 55000 rears. I'd guess it is about 30,000# for the sake of arguement, particularly if it has a double frame. Don't hold me to it though.Good luck. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162226 Share on other sites More sharing options...
2stacksuperdog Posted February 6, 2013 Share Posted February 6, 2013 Isn't that also the truck that they were talking about on here it was a B-52 Quote Matt Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162228 Share on other sites More sharing options...
Bigdogtrucker Posted February 6, 2013 Share Posted February 6, 2013 Isn't that also the truck that they were talking about on here it was a B-52Yeah Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162230 Share on other sites More sharing options...
Giovanni Croeze Posted February 6, 2013 Author Share Posted February 6, 2013 Sorry to have lost you guys, its a doubled wall and I have no clue about the rear axles.The lowboy is the old style trailer that goes behind a fifth wheel semi truck. I will use the lowboy to transport the mack to BHM. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162233 Share on other sites More sharing options...
GreenGiant2 Posted February 6, 2013 Share Posted February 6, 2013 i thought so too, check to see if the door tag matches the frame vin, then you will know if it is a b-52 or b-61 Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162234 Share on other sites More sharing options...
Giovanni Croeze Posted February 6, 2013 Author Share Posted February 6, 2013 Do you have a link of the thread on this truck? Evidently I am not good using the "search" function :-) Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162237 Share on other sites More sharing options...
realwolfdaddy Posted February 6, 2013 Share Posted February 6, 2013 I have a B81 dump truck that weight 48k unloaded. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162239 Share on other sites More sharing options...
Bigdogtrucker Posted February 6, 2013 Share Posted February 6, 2013 I have a B81 dump truck that weight 48k unloaded.Any pics? Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162240 Share on other sites More sharing options...
GreenGiant2 Posted February 6, 2013 Share Posted February 6, 2013 january 15th started by toller . its under B-52? Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162242 Share on other sites More sharing options...
fifth wheel Posted February 6, 2013 Share Posted February 6, 2013 48k? Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162314 Share on other sites More sharing options...
realwolfdaddy Posted February 6, 2013 Share Posted February 6, 2013 48,000.00 lbs Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162315 Share on other sites More sharing options...
Giovanni Croeze Posted February 6, 2013 Author Share Posted February 6, 2013 48k or 24 ton? My trailer can't handle that :-(. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162318 Share on other sites More sharing options...
realwolfdaddy Posted February 6, 2013 Share Posted February 6, 2013 you should be about 8k under my b81 Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162326 Share on other sites More sharing options...
realwolfdaddy Posted February 6, 2013 Share Posted February 6, 2013 Big thing to look out for. I have 4 b models with dumps and they all had multi layered floors that can make allot of different and all had a few tons of dirt, rock, or trash in them. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162328 Share on other sites More sharing options...
Freightrain Posted February 6, 2013 Share Posted February 6, 2013 Typical tractor is around 15K, so add the weight of the steel bed? 8-10K and you're at 25K easy. And that is likely a bit on the low side, but close guesstimate.Not sure how you are going to get 26ft of truck onto a 20ft trailer? Leave the rear tandems hang off the back? You'll have a hard time getting on the trailer and away from the ramps with it hanging off the back. I bet the tail end is a touch heavier then the front, maybe not by much. Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162331 Share on other sites More sharing options...
Giovanni Croeze Posted February 6, 2013 Author Share Posted February 6, 2013 Not sure how you are going to get 26ft of truck onto a 20ft trailer? Leave the rear tandems hang off the back? You'll have a hard time getting on the trailer and away from the ramps with it hanging off the back. I bet the tail end is a touch heavier then the front, maybe not by much.I was planning on removing the rear tires on the furthest axle and load it backwards on the lowboy and let the truck slide over the front part of the trailer. The ramps will be chained to the front bumper. But I am not sure, it this thing weights over 15 ton I will bail out. "When in doubt, be a chicken" kinda thing :-). Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162368 Share on other sites More sharing options...
rsb502 Posted February 7, 2013 Share Posted February 7, 2013 I was gonna guess it to be closer to 20-25,000, I had several R model tri axles with 16' bodies that were all under 28,000, one was only 24,640, my 04 Granite tri axle was 26,240 with a Ox barrel body that was 3/8" thick AR400 and 44k rears, double frame,etc. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162744 Share on other sites More sharing options...
phildirt Posted February 8, 2013 Share Posted February 8, 2013 That's not the B 52--- Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162746 Share on other sites More sharing options...
GreenGiant2 Posted February 8, 2013 Share Posted February 8, 2013 sure looks like the one posted Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162749 Share on other sites More sharing options...
Giovanni Croeze Posted February 8, 2013 Author Share Posted February 8, 2013 i spoke with the owner last night and based on the emblems on the hood its a B61. I was going to ask him to check on the manufacture plate but the way I see it it does not matter. I am buying it as a B61 and it will be a bonus if turns to be a B52. Btw, the pictures that he send me shows its a triple framed. Owner believes it weights no more than 30k so my lowboy should handle it fine. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162772 Share on other sites More sharing options...
Bigdogtrucker Posted February 8, 2013 Share Posted February 8, 2013 I'd agree on that weight. Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162773 Share on other sites More sharing options...
Maddog13407 Posted February 8, 2013 Share Posted February 8, 2013 yup, agree. single axle B61 with a quadbox weighs around 12,000, add the trunion and other axle its probably around 18, plus the box and that thing looks to have a lightweight cheap box on it so id say your def under 30,000. probably more around 24 or 25,000 Quote Link to comment https://www.bigmacktrucks.com/topic/29809-b61-tandem-dump-truck-weight/#findComment-162779 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.