keg1 Posted February 11, 2013 Share Posted February 11, 2013 does anyone know what 2012 395 with m drive would run like? seems like an awful small engine . Quote Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/ Share on other sites More sharing options...
GearheadGrrrl Posted February 11, 2013 Share Posted February 11, 2013 Wonder how we ever moved the loads with mere 237 Horsepower Maxidynes... Quote Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163565 Share on other sites More sharing options...
Bigdogtrucker Posted February 11, 2013 Share Posted February 11, 2013 Wonder how we ever moved the loads with mere 237 Horsepower Maxidynes...170/180HP 673's? Quote Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163566 Share on other sites More sharing options...
2stacksuperdog Posted February 11, 2013 Share Posted February 11, 2013 170/180HP 673's?How about the old AC's? Quote Matt Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163570 Share on other sites More sharing options...
Green Dash Posted February 11, 2013 Share Posted February 11, 2013 does anyone know what 2012 395 with m drive would run like? seems like an awful small engine .That's the spec of the newest Pinnacles where I work. We have one at my terminal and although it is not my daily driver, I was sent to pick it up at the company HQ and stayed in it for the rest of the night.The heaviest load I pulled was 26,000 lb in a 48 ft dry box. And it was able to pull the hills on the PA Turnpike between New Stanton and Carlisle without ever having to drop out of 12th gear and RPM's never went below 1250. Most of our MP7-395's have 10 speed Fullers behind them which pull the same. The company is likely going to stick with the Mdrives based on their initial experience with them and, according to my Safety Manager, they have a 750,00 mile warranty. Many of the current MP7 drivers had driven Sterlings with Mercedes MB4000's rated at 450 hp prior to being assigned new Pinnacles and say the Mack's pull much better on hills. Quote Jim Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163582 Share on other sites More sharing options...
MackMann85 Posted February 11, 2013 Share Posted February 11, 2013 one of the most popular power ratings right now (depending on what you are hauling obviously). also noted as one of the best fuel mileage ratings Quote Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163628 Share on other sites More sharing options...
2stacksuperdog Posted February 11, 2013 Share Posted February 11, 2013 Wonder how we ever moved the loads with mere 237 Horsepower Maxidynes...Hallamore moved all the bridge beams for 691 with 2 DM600's with 237's and duplexs and 2 DM800's with 350 Cummins and 6 speeds. The beams weighed 62tn and they were on a 5-axle flatbeds. Quote Matt Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163705 Share on other sites More sharing options...
keg1 Posted February 12, 2013 Author Share Posted February 12, 2013 Green dash thanks for the info. Just wondering what they would run like i know my 2000 ch with 400 is pretty sick. I see a 2012 Pinnacle that didnt seem like to bad a price but wasnt sure about that setup. Quote Link to comment https://www.bigmacktrucks.com/topic/29895-2012-mack-395/#findComment-163761 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.