Terry T Posted February 26, 2013 Share Posted February 26, 2013 http://www.liveleak.com/view?i=c5f_1361768463There might be someone on this board who can translate some of the disccusions but the video kinda speaks for its self. Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/ Share on other sites More sharing options...
Timothy Maikshilo Posted February 26, 2013 Share Posted February 26, 2013 It's Russian and I'm sure Vlad can fill us in on the conversation. I think they should have hooked the trucks to the axles in stead of the bumpers. Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168019 Share on other sites More sharing options...
hicrop10 Posted February 26, 2013 Share Posted February 26, 2013 2 rolls of duck tape and some baling wire and they will be back in business. Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168045 Share on other sites More sharing options...
mackniac Posted February 26, 2013 Share Posted February 26, 2013 new meaning to C.O.E. = Cab Off Engine ! not nice at all !! Quote Makniac , collector and customizer of die-cast model in 1/50th scale Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168047 Share on other sites More sharing options...
Lmackattack Posted February 26, 2013 Share Posted February 26, 2013 OUCH!. PULLING FROM ONE TOW HOOK! IDIOTS! Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168051 Share on other sites More sharing options...
Freightrain Posted February 26, 2013 Share Posted February 26, 2013 I heard Homer Simpson..........................................................................."DOH"I wanna see who lays claim to hooking the chain? Quote Larry 1959 B61 Liv'n Large...................... Charter member of the "MACK PACK" Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168053 Share on other sites More sharing options...
hatcity Posted February 26, 2013 Share Posted February 26, 2013 At the 2:00 mark, I believe the guy told the tow driver;"you tore the shit out of the frame" And the driver smiled Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168055 Share on other sites More sharing options...
57 bcr Posted February 26, 2013 Share Posted February 26, 2013 Must have been company drivers.Too much laughing going on! After I seen it was not a Renault with an E-9 in it,I cancelled my call to Superdog! Quote IF YOU BOUGHT IT, A TRUCK BROUGHT IT..AND WHEN YOU'RE DONE WITH IT, A TRUCK WILL HAUL IT AWAY!!! Big John Trimble,WRVA Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168056 Share on other sites More sharing options...
Vladislav Posted February 26, 2013 Share Posted February 26, 2013 Thank you, all that looks funny (to me).Most comments conteins of "let's go" (davay', davay') in the beginning and the bunch of "f***'s" continueing.The words "you tore the shit out of the frame" were really in there but a little later, about KrAZ front tow hook. On the minute 2.00 the guy asked the driver about towing his Scania right after that.And the last comment was "look at, the trailer is Ok!".57BCR, you don't need to disturb Superdog, that Renault is not the one with E9 but a small other. They are also avalible in Australia by the name of Quantum. 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168063 Share on other sites More sharing options...
rsb502 Posted February 26, 2013 Share Posted February 26, 2013 ok so looks to me like the tow hook in the bumper is a screw in like a volvo cabover in the Mid East, we had lots of practice with them in IQ, they screw into two holes in the bumper to a crossmember that is bolted across the front frame horns. In the Volvo trucks it was clearly marked in three languages, "NOT FOR PULLING LOADED/TRACTOR ONLY" we had to make an adapter to get to use that point to tow a tractor but if we could we got a civilian wreckewr(mostly Volvo EMPL's from Austria) to use the underlift and forked the front axle to tow them. Of course I hooked a HET to one and yanked the crap out of it to get it out of the mud once at camp Cedar II and I heard lots of popping! Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168115 Share on other sites More sharing options...
2stacksuperdog Posted February 26, 2013 Share Posted February 26, 2013 I like how the cab fell off. Quote Matt Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168120 Share on other sites More sharing options...
rsb502 Posted February 26, 2013 Share Posted February 26, 2013 I like how the cab fell off. Cab hinge is attatched to the bracket on the front frame horn that the crossmember bolts to, Im kinda surprised it didnt get both sides its not real sturdy and they were really jerkin on it with two trucks, especially since its not for pulling a loaded truck. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168124 Share on other sites More sharing options...
Gmerrill0516 Posted February 27, 2013 Share Posted February 27, 2013 The black and blue 6x6 looks cool. I'm guessing the boat was anchored to a Soviet sub lurking in the bottom of that water. That thing didn't want to budge one inch!!! I say off to Siberia with the guy in charge for being a dope. One would think that running some extra cable back to the trailer or maybe figure out what the sucker is hung up on might have been a passing thought. A big boulder or a piece of ledge might have been in front of a trailer tire...might have been worth a second look....No? Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168128 Share on other sites More sharing options...
mackmb212 Posted February 27, 2013 Share Posted February 27, 2013 Thank you, all that looks funny (to me).Most comments conteins of "let's go" (davay', davay') in the beginning and the bunch of "f***'s" continueing.The words "you tore the shit out of the frame" were really in there but a little later, about KrAZ front tow hook. On the minute 2.00 the guy asked the driver about towing his Scania right after that.And the last comment was "look at, the trailer is Ok!".57BCR, you don't need to disturb Superdog, that Renault is not the one with E9 but a small other. They are also avalible in Australia by the name of Quantum.Vlad what is that truck in the middle,the one the frame broke off ? That is a mean looking truckRudy Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168141 Share on other sites More sharing options...
DodgeMan Posted February 27, 2013 Share Posted February 27, 2013 I think they needed a bigger truck to put the boat trailer on and then 2 of those reckers Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168145 Share on other sites More sharing options...
vision386 Posted February 27, 2013 Share Posted February 27, 2013 Thats what i wanted to know,thats one hell of a truck in the middle KRAZ?......................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168146 Share on other sites More sharing options...
JTFormula Posted February 27, 2013 Share Posted February 27, 2013 That's one hell of a yacht. Quote ~ JT Burkard ~ AKA Sweaty Mackwww.jtresto.com www.wickedreputation.netwww.jonathanthomasmotorcars.com Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168205 Share on other sites More sharing options...
Popular Post Vladislav Posted February 27, 2013 Popular Post Share Posted February 27, 2013 The middle truck was KrAZ-255 6x6 with V8 naturally asp.diesel. One of my loveliest trucks. KrAZ is the further developement of YaAZ trucks those were basically made as Mack NR of WW2.6x6 KrAZ has overall width of 2.80 meter so doesn't come in road limit 2.50 (as in Europe) so there're troubles of registration for road use last years.There was a unit for sell for a cheap this last spring with a big mech shovel. I though about but stopped myself from one more project. 4 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168341 Share on other sites More sharing options...
mackmb212 Posted February 28, 2013 Share Posted February 28, 2013 Those are some bad ass trucks vlad,thanks for sharing. Quote Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168408 Share on other sites More sharing options...
vision386 Posted February 28, 2013 Share Posted February 28, 2013 Thanks for the information Vlad ! i thought it was a KRAZ,but not sure,my knowledge of foreign trucks is somewhat limited!...............................Mark Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168419 Share on other sites More sharing options...
vision386 Posted February 28, 2013 Share Posted February 28, 2013 As far as foreign trucks go,i always thought the Mercedes-Benz "Unimog" was a very unique truck! but then maybe its just my German ancestry showing up?........................................Mark (Photos courtesy of Mercedes-Benz North America Ltd.) Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168422 Share on other sites More sharing options...
farmer52 Posted February 28, 2013 Share Posted February 28, 2013 I see the U.S. Military is using Unimog vehicles. WTF, can't we build our own military vehicles? Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168493 Share on other sites More sharing options...
Vladislav Posted February 28, 2013 Share Posted February 28, 2013 Nice looking "Unimogs", especially the second one. There were many of them in existance overhere. There was a lot imported into the Soviet Union by olimpic games of 1980. They were of the series as on the pics. A guy living near me has one. He made me a ride around the nearest forest, it was incredable. He wanted to sell it once for reasonable although I stopped myself again. It was hard to do because I'm all on Mercedes excepting Macks. Pair of shots from the off-road fest I took part a couple of years ago. 1 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/30189-not-enough-trucks/#findComment-168528 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.