rmodelowner Posted March 6, 2013 Share Posted March 6, 2013 Could someone explain to me how do I bypass puff limiter? Mine is leaking a little and i think it is clogged . I would like to bypass it at least to see if this solves my problem. Do i just plug a line somewhere? Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted March 6, 2013 Share Posted March 6, 2013 Put a switch in to turn it on and off Quote Matt Link to comment Share on other sites More sharing options...
rmodelowner Posted March 6, 2013 Author Share Posted March 6, 2013 wouldn't that be more effort than just removing it?I don't really understand how its hooked up i see the one line goes to the intake manifold??? i think?? and the other looks like its going in the cab. I ran out of daylight i will have a better understanding tomorrow. I have 3 toggle switches in my truck i haven't figured out what there for maybey ones for that i will check tomorrow. Thanks Quote Link to comment Share on other sites More sharing options...
rsb502 Posted March 6, 2013 Share Posted March 6, 2013 The E9 puff limiter is on the intake above the head, one air line to the firewall to a T in an air line for supply air and another to the solenoid on the pump, remove the valve and air lines, plug the hole in the intake the hole in the puff limiter solenoid and the T on the firewall, there done and gone. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
rmodelowner Posted March 6, 2013 Author Share Posted March 6, 2013 Thank you good sir! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.