hatcity Posted April 2, 2013 Share Posted April 2, 2013 Heard a strange noise from the motor today. Open the hood and the A/C belt(yes it was hot here today) is jumping and missing. Shut the engine and take a look. Belt is missing teeth and starting to seperate. OK, cut it off and continue the day. Go to NAPA, get a new belt. PIA to replace as you have to remove fan, and main belt. Had it done in a few minutes. Start it up again and check that belts are lined up nice.What the hell? water pump is wet, bottom only. Thought was that maybe belt had hit the fitting and lossened it a little. Tighten again, start. NOPE. weep hole is where it's coming from.Replaced water pump about 2 years ago. PIA also with the pulleys off and on, remove fan and coolant.Need to call MACK in the morning. Hopefully they have one with the pulleys on.Machine shop up the street did it last time, $25 cash 15 minutes.Looks like saturday is booked now. No fishing Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/ Share on other sites More sharing options...
rsb502 Posted April 2, 2013 Share Posted April 2, 2013 Always somethin with a truck Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/#findComment-175644 Share on other sites More sharing options...
BAD DOG Posted April 2, 2013 Share Posted April 2, 2013 If it's got tits or tires it's going to give you trouble sometimes, but both are a lot of fun sometimes too. Just gotta take the good with the bad I guess. 2 Quote Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/#findComment-175651 Share on other sites More sharing options...
vision386 Posted April 2, 2013 Share Posted April 2, 2013 Damn! i gotta agree with that! it ain't easy to change ANY belt on a CX!.......................................Mark Quote Mack Truck literate. Computer illiterate. Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/#findComment-175746 Share on other sites More sharing options...
bbigrig Posted April 3, 2013 Share Posted April 3, 2013 Damn! i gotta agree with that! it ain't easy to change ANY belt on a CX!.......................................MarkCouldn't believe the crap I went through changing the Fan belt (Horton Fan) on one of my CXU's with an MP8. Not so much of a side of the road job anymore....sheeeesh... 1 Quote Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/#findComment-175811 Share on other sites More sharing options...
hatcity Posted April 6, 2013 Author Share Posted April 6, 2013 Well the water pump is done. Total of 5 hours including running for a while to get hot and look for leaks.Machine shop swapped pulleys again, but cost me $40 CASHMy body is too old to be doing this. Where's that boy of mine? Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/30647-roseanne-rosanadana-its-always-something/#findComment-176429 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.