BKrois Posted November 13, 2014 Share Posted November 13, 2014 a few machines working down in Fairfield by the beach 1 Quote BryanMy Photo Albums Link to comment Share on other sites More sharing options...
Popular Post 2stacksuperdog Posted November 17, 2014 Popular Post Share Posted November 17, 2014 Old Hoptoe 3 Quote Matt Link to comment Share on other sites More sharing options...
BKrois Posted December 4, 2014 Share Posted December 4, 2014 Pagliazzo from Waltham,MA starting to ripout a gunite pool with his Cat 235B 1 Quote BryanMy Photo Albums Link to comment Share on other sites More sharing options...
Popular Post Ezrider Posted December 4, 2014 Popular Post Share Posted December 4, 2014 (edited) edit to add picture discriptionsday cab mack cx with side dump hauling clay dirt they were dropping off the slope got over too far before he started dumping took the truck and trailer over with the load. they used the excavator and a dozer to upright it.long x bridge hwy 85 in nd, truck struck the bridge with the excavator knocking it off the trailer, caused structural damage to the bridge and shut the bridge down for several weeks.doing a demolition of a runway super thick concrete loaded by excavator. (getting loaded with ho's all night long) Edited December 4, 2014 by Ezrider 3 Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted December 4, 2014 Share Posted December 4, 2014 Cat 2 Quote Matt Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 4, 2014 Share Posted December 4, 2014 Don't think that's the way they should be loaded Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
Red Horse Posted December 4, 2014 Share Posted December 4, 2014 Okay-now on the other end of the spectrum, borrowed this Cat 300.9D micro to do a little stone wall work-also figured I would get rid of a few stumps-makes a good "hatchet " to chop routes and then the 4790 with the grapple pulls them out like carrots! 2 Quote Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 4, 2014 Share Posted December 4, 2014 Some ones insurance co. Isn't going to like that Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
Red Horse Posted December 5, 2014 Share Posted December 5, 2014 Some ones insurance co. Isn't going to like that?? you talking about missing ROP? Last job had a lot of low OH obstructions. Quote Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 5, 2014 Share Posted December 5, 2014 No the bridge. Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
Red Horse Posted December 5, 2014 Share Posted December 5, 2014 No the bridge.Hah-for sure-wonder how his renewal rates will be. Quote Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 5, 2014 Share Posted December 5, 2014 I bet it's not a renewal. Geico.can you help me Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
slpwlker Posted December 6, 2014 Share Posted December 6, 2014 That bridge has been the target of many over size the last few months Quote Link to comment Share on other sites More sharing options...
Ezrider Posted December 6, 2014 Share Posted December 6, 2014 yeah long-x gets hit a few times a year and its like a 16'10" bridge with a overhigth detection system with flashing lights, i think there is already plans to replace it as part of the 4 lane expatiation on hwy 85as far as insurance im sure there insurance is not happy at all with them, i believe there still working on the bridge. I haven't been out that way in a while but last i heard is they had the bridge opened back up 1 lane with flagers and they were still working on it, i know they ripped a cross beam out of the bridge. Quote Link to comment Share on other sites More sharing options...
slpwlker Posted December 6, 2014 Share Posted December 6, 2014 well when a dumb ass that shouldn't drive a bike with a trailer plays truck driver that shit happens. both crane and excavator where driver error!! 1 Quote Link to comment Share on other sites More sharing options...
Popular Post j hancock Posted December 22, 2014 Popular Post Share Posted December 22, 2014 Vintage Michigan T6-K Power Shovel. 4 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Popular Post 41chevy Posted December 23, 2014 Popular Post Share Posted December 23, 2014 1930's Fordson /Wilford Shovel conversion. Used Fordson engine, trans and differential as basis. 3 Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
GreenGiant2 Posted December 23, 2014 Share Posted December 23, 2014 Vintage Michigan T6-K Power Shovel.got one like this behind my place, need to scrap it for a friend. if any interest let me know. all its left is the truck and house. Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment Share on other sites More sharing options...
gearhead204 Posted February 11, 2015 Share Posted February 11, 2015 my friend Roger loaned me a toy for a while, since his quarry doesn't run during the winter, so I had a few projects to keep it from rusting all winter. very nice machine 4500hrs. 220 Komatsu 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Timothy Maikshilo Posted February 11, 2015 Popular Post Share Posted February 11, 2015 We all need a friend named Roger 3 Quote Link to comment Share on other sites More sharing options...
j hancock Posted February 11, 2015 Share Posted February 11, 2015 Looks Good!Are you filming Gold Rush-Washington? 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Red Horse Posted February 11, 2015 Share Posted February 11, 2015 Vintage Michigan T6-K Power Shovel.Hah! Brings back memories of my youth. we had a T6K Backhoe. The boom and the dipper were like heavy pipe sections. I was never allowed to run the hoe ("cause then kid you'll know what I know") but I was the driver job site to job site.. Always amazed me that big cab with no motor in it! At which series I wonder did the "upper" get its own power? Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted February 11, 2015 Share Posted February 11, 2015 gold rush wash. eh............even if I had monster red I don't think it could handle the sex stones I'm pulling out of the ground! Quote Link to comment Share on other sites More sharing options...
PeterMack Posted February 27, 2015 Share Posted February 27, 2015 Saw these all lined up at an excavators yard just outside of Madison WI. Looks like they're parked for the season. 2 Quote Link to comment Share on other sites More sharing options...
j hancock Posted April 22, 2015 Share Posted April 22, 2015 CAT 245 parts rig now. Pretty much picked over. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.