thomastractorsvc Posted April 22, 2013 Share Posted April 22, 2013 anyone have a part number for the lug nut that holds the clamping wedge on, just got back from the parts house and they can order it if I come up with a part number unless its for a pilot hub or budd thimble they were lostThey are also smaller than rear axle Lug Nut Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Superdog Posted April 22, 2013 Share Posted April 22, 2013 no part # but they are 1 1/16th coarse thread Quote Link to comment Share on other sites More sharing options...
Solution 39 Baby Mack Posted April 22, 2013 Solution Share Posted April 22, 2013 Not to step on anybody's toes but I think Mike means they are 1 1/16" hex.The thread size is 5/8-11 and I'm pretty sure they were "ball face" nuts.The pt.#s for 5/8" ball face nuts are as follows:Dayton #13-8002Euclid #E-4986AErie #538UBWP #M-44Ron Quote Link to comment Share on other sites More sharing options...
j hancock Posted April 22, 2013 Share Posted April 22, 2013 I know that most trucks are now running aluminum or steel wheels instead of spokes, but sort of sad the parts house didn't have good people or people that were a little more experienced to help you out on something sort of simple. 1 Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
thomastractorsvc Posted April 22, 2013 Author Share Posted April 22, 2013 Thanks all,I know that most trucks are now running aluminum or steel wheels instead of spokes, but sort of sad the parts house didn't have good people or people that were a little more experienced to help you out on something sort of simple.Kinda funny I thought myself I bought both the wedge and the nut and he started looking in a book and then got out a caliper then went back to the book and said if you can find a part number I can order them for you. Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
2stacksuperdog Posted April 23, 2013 Share Posted April 23, 2013 Thanks all,Kinda funny I thought myself I bought both the wedge and the nut and he started looking in a book and then got out a caliper then went back to the book and said if you can find a part number I can order them for you.That seems like the only words they do know. Part number or vin 1 Quote Matt Link to comment Share on other sites More sharing options...
thomastractorsvc Posted April 26, 2013 Author Share Posted April 26, 2013 I was able to source some locally anyone need some I can get them for about $1 each plus shipping just contact me, they are the correct ball face 5/8" inch course thread nuts made in USA. Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.