Jump to content

E9 engine


Go to solution Solved by Back In Black Pulling,

Recommended Posts

  • Solution

When you release parking brake it puts air to the valve so your rack can only travel a little. When you start to build boost it turns off air flow to puff limiter then lets the rack move the hole way. If you want it guicker you can un screw limiter from front of pump and add washers or disconnect the line from parking valve and plug it to make lots of smoke!!!!

Link to comment
https://www.bigmacktrucks.com/topic/31161-e9-engine/#findComment-183194
Share on other sites

Remove it, unless you turn up the pump it doesn't make that much more smoke, I cranked my pump WAY up and removed my smoke puff limiter. Now I can up shift till the rpm gets to about idle in gear then roll into it and leave a smoke screen behind me that turns on automatic headlights. EPA just takes the fun outta everything.

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Link to comment
https://www.bigmacktrucks.com/topic/31161-e9-engine/#findComment-183249
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...