let it loose Posted June 19, 2013 Share Posted June 19, 2013 Anyone have a diagram or instructions on how to replace a buzzer on a 1996 DM? DOT did not approve of its inoperable status. Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted June 19, 2013 Share Posted June 19, 2013 Does it got the one bolted above the clutch pedal or in fuse panel Quote Matt Link to comment Share on other sites More sharing options...
slpwlker Posted June 19, 2013 Share Posted June 19, 2013 Anyone have a diagram or instructions on how to replace a buzzer on a 1996 DM? DOT did not approve of its inoperable status. does the light light up? If so thats all you need. My Buzzer been inop for a couple of years. Light goes on and no problems Quote Link to comment Share on other sites More sharing options...
let it loose Posted June 20, 2013 Author Share Posted June 20, 2013 There isn't a light for it, I'll have to look around for to see where its bolted to. I thought they were behind the dash. Quote Link to comment Share on other sites More sharing options...
jakebrake86 Posted June 20, 2013 Share Posted June 20, 2013 It should be under the dash on the left hand side. Mine works occasionally but the light works all the time. I really don't mind being broke, because it beeps with the turn signals when it does work. 1 Quote Jake Link to comment Share on other sites More sharing options...
let it loose Posted June 20, 2013 Author Share Posted June 20, 2013 It should be under the dash on the left hand side. Mine works occasionally but the light works all the time. I really don't mind being broke, because it beeps with the turn signals when it does work.Yeah, mine is the same way. Very annoying when you have your hazards on. 1 Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted June 20, 2013 Share Posted June 20, 2013 Yeah, mine is the same way. Very annoying when you have your hazards on.If its the beepy one it should be above the clutch pedal bolted to a triangular piece of metal with a hole in it. Quote Matt Link to comment Share on other sites More sharing options...
2stacksuperdog Posted June 20, 2013 Share Posted June 20, 2013 does the light light up? If so thats all you need. My Buzzer been inop for a couple of years. Light goes on and no problemsI believe it is federal law that it must have a audio and visual warning system. Quote Matt Link to comment Share on other sites More sharing options...
slpwlker Posted June 20, 2013 Share Posted June 20, 2013 I believe it is federal law that it must have a audio and visual warning system.Go check again. I have to go thru an inspection every 120 days company policy on 10 years old or older. also been Dot'd more times then I care to and 3 level 1's in Pa. Light or buzzer if both great but 1 or the other. Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted June 20, 2013 Share Posted June 20, 2013 Oh boy dont come to CT then. They will put you out of service for not having both. And they get mad if there is only one buzzer or beeper for everything in the truck. Quote Matt Link to comment Share on other sites More sharing options...
slpwlker Posted June 20, 2013 Share Posted June 20, 2013 They can do what they want the law is the law. Remember not all trucks at 1 time had both. I have a copy of the reg in the truck just for the rookie out of school looking to make a name Quote Link to comment Share on other sites More sharing options...
j_martell Posted June 21, 2013 Share Posted June 21, 2013 (edited) I belive Ontario is the same. Both are required, but only one is needed to prevent oos Edited June 21, 2013 by j_martell Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment Share on other sites More sharing options...
BC Mack Posted June 21, 2013 Share Posted June 21, 2013 I checked my inspection manual for B.C. and also the NSC and CVSA manuals... these will obviously reflect US equivilents as they are trans border accepted. Section 3A.. low air pressure warning. fail test for missing or inoperative lamp or buzzer fail test if "two systems fail to operate below 55psi immediate out of service if.. "a" warning system fails to operate under 50psi" I am an authorised vehicle inspector here in BC and have come across this issue before... vehicle should not have left the yard if it fails any air test during the pre-trip... buzzer and lamp must operate if a vehicle is still equipped with single air system and not modified to 121 dual system then whatever the factory fitted day one must work... any update to the air system must work. a dot inspector does have some room for judgement and that is why rules seem to waver, I don't have that ability, if a vehicle is presented to me for an annual govt sticker and either system isn't working then I fail it and it can't drive away because the first thing I do is scrape the sticker off the window thereby invalidating the current inspection... them's the rules!!! even on the PM's I will exhaust primary and secondary systems individually to check each low press switch. yeah!! I'm anal when it comes to this stuff, but we live in the hilly part and the buses carry 120 people... BC Mack Quote Link to comment Share on other sites More sharing options...
let it loose Posted June 21, 2013 Author Share Posted June 21, 2013 Yeah its under the dash. I switched it out with one I knew that worked and I still have nothing. Bad ground or power wire possibly? Quote Link to comment Share on other sites More sharing options...
Whiskeyisland Posted January 31, 2020 Share Posted January 31, 2020 (edited) So is it normal for low air buzzer to beep every time you use turn signal? 1999 Mack rb688s and also for break lights to come on when low air buzzer comes on. They go off once air pressure is up. First time with Mack. Edited January 31, 2020 by Whiskeyisland Quote Link to comment Share on other sites More sharing options...
terry Posted January 31, 2020 Share Posted January 31, 2020 39 minutes ago, Whiskeyisland said: So is it normal for low air buzzer to beep every time you use turn signal? 1999 Mack rb688s and also for break lights to come on when low air buzzer comes on. They go off once air pressure is up. First time with Mack. It is common for the break lights to come on with the low air buzzer, but not with the turn signal, sounds like somebody has something cross wired, the turn signal and break light use the same filament in the taillight assembly. terry Quote Link to comment Share on other sites More sharing options...
Whiskeyisland Posted January 31, 2020 Share Posted January 31, 2020 Okay. Thought the buzzer going off with signal lights was odd. That would drive me crazy if driving with four ways on. Lol. Explains why they had the buzzer unhooked when we bought the truck. So looks like hint is on for a crossed up hook up. Any usual suspects to start at? Thank you for the help, much appreciated. Quote Link to comment Share on other sites More sharing options...
terry Posted January 31, 2020 Share Posted January 31, 2020 28 minutes ago, Whiskeyisland said: Okay. Thought the buzzer going off with signal lights was odd. That would drive me crazy if driving with four ways on. Lol. Explains why they had the buzzer unhooked when we bought the truck. So looks like hint is on for a crossed up hook up. Any usual suspects to start at? Thank you for the help, much appreciated. Would not know where to start, maybe get a wiring diagram and start tracking. terry Quote Link to comment Share on other sites More sharing options...
hogie Posted January 15, 2023 Share Posted January 15, 2023 i am having problems when i hit the brakes the low air buzzer comes on a 1999 mack rd Quote Link to comment Share on other sites More sharing options...
hogie Posted January 15, 2023 Share Posted January 15, 2023 1999 Mack truck rd Quote Link to comment Share on other sites More sharing options...
hogie Posted January 15, 2023 Share Posted January 15, 2023 Have problems with my 1999 rdMack truck when I push the brakes the low air buzzer comes on. Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted January 15, 2023 Share Posted January 15, 2023 What is the air pressure when this happens? If its above 60 PSI, on an RD the (Pedal Operated) brake light switch is on the center of the firewall under the hood... Has any work been done to it lately? any air pressure switches been replaced? jojo Quote Link to comment Share on other sites More sharing options...
hogie Posted January 15, 2023 Share Posted January 15, 2023 Yes the low air buzzer i replaced Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted January 15, 2023 Share Posted January 15, 2023 how about the air switches above the pedals? Quote Link to comment Share on other sites More sharing options...
hogie Posted January 15, 2023 Share Posted January 15, 2023 I have not changed it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.