FOR SALE EHU?

[h67st]

Is this an EHU? Cab looks pretty bad. Sorry I couldn't get a photo, my computer wouldn't let me.

http://cgi.ebay.com/ebaymotors/1940-MACK-C-O-E-/141004129935?_trksid=p2045573.m2042&_trkparms=aid=111000&algo=REC.CURRENT&ao=1&asc=27&meid=8628646231957107572&pid=100033&prg=1011&rk=3&sd=221245268774&&forcev4exp=true

[2stacksuperdog]

Dont look too bad. Its mostly there.

[Superdog]

either EHU or EQU

[umodelnut]

I like those. They look sweet.

[j hancock]

Should be saved but will have to do some fabrication work for the hood side panels which are missing and get after the bad floor which is causing the doors to sag.

Still kicking myself for not pursuing an EEU fire truck hose tender years ago.

[Andy Wright]

One of the guys on the registry is missing one of the panels on his EHU. Are they the same as an EQU and I take it it's rare to find a truck with them?

Still kicking myself for not pursuing an EEU fire truck hose tender years ago.

That would have been something to see.

[j hancock]

One of the guys on the registry is missing one of the panels on his EHU. Are they the same as an EQU and I take it it's rare to find a truck with them?

That would have been something to see.

The hood side panels would be the same between the two models and a little tough to find.

Yeah, should have done the deal on the EEU. Wasn't even smart enough to take a picture.

Jim

[Andy Wright]

At least you've seen an EEU, Jim! I'm sure I knew they existed but...

Any external differences between an EQU and EHU?

[glenlunberg]

Should be saved but will have to do some fabrication work for the hood side panels which are missing and get after the bad floor which is causing the doors to sag.

Still kicking myself for not pursuing an EEU fire truck hose tender years ago.

I agree to you. This truck should be saved. I think this truck is great especially when it's get upgraded or remodel.

[Vladislav]

Good object to work over on my mind.

Front axle looks too light for EQU and for EHU also but I'm not shure.

The rear axle seems to me aftermarket Timken-Detroit.

There are spokes in front so probably there were rear spokes also.

The guy who put that axle had to cut the cross member off to clear the shaft.

Not a great trouble to fix it on my mind in relation to clean up and rebuild all the vehicle.

Very interesting find and priced reasonable.

[cncFireman]

I would love to have it but at 1500 is beyond what I would pay

[Vladislav]

I would love to have it but at 1500 is beyond what I would pay

I would love to pay 1500 but transportation to the East coast seems to me beyond of my pocket.

Any ideas on how to transport it? I like it too much!

[cncFireman]

Don't get me wrong I would love to have that rig. I am not a coe fan but the e/a series cab over is the coolest looking coe ever. At is condition however with a different axle I could not see paying more than 1000. Its only 7 hours away as well I wish it was in better condition.

[Vladislav]

I see nothing wrong in your appinion for shure.

I'm also not a great COE fan although such models as EHU and H63/67 look strange and too nice on my mind.

As long I'm on here I slowly look these models for sale and haven't seen many of them.

If the memory serves me good, there were no more than a couple EHU's during the last two years.

This one is a tracktor and I like it better than flatbeds I saw before.

Due to my location it doesn't matter this truck cost $1000 or $2000 because I'll need to add something about $8000 to get it home.

And I can better ship it from the East coast.

But the need to pay $1500 with additional $2000-$3000 for inside the US transportation doesn't make much luck.

It looks a kind of good to me though because I better should work on my current projects than continue to collect nice scrap.

What we all like to do so much

[cncFireman]

If only I had more room for scrap.

[jaysm35a2]

I tried to buy it, guy was pretty un willing to help or answer some questions.

[Vladislav]

I tried to buy it, guy was pretty un willing to help or answer some questions.

Maybe he's just such a kind of man.

It's his truck for shure and his way to addvertize it.

Looks like it will lay down the yard for a long.

There are no engine pics also.

Let's wait for some time.

There were no bids, maybe he'll be more active for the next attempt.

Haven't you got his contact info excepting ebay? (Don't want you to tell it me, just wonder).