rsb502 Posted June 26, 2013 Share Posted June 26, 2013 Ok guys I got someone looking for an endt piston and liner, anybody got one they would part with or know where to get one? Thanks Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/ Share on other sites More sharing options...
e9500v8 Posted June 26, 2013 Share Posted June 26, 2013 Good luck !! Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191149 Share on other sites More sharing options...
theakerstwo Posted June 26, 2013 Share Posted June 26, 2013 Call Rob and he can tell you who all don't got them. Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191223 Share on other sites More sharing options...
BAD DOG Posted June 28, 2013 Share Posted June 28, 2013 Try Northwest Truck in Edmonton Alberta Harold had the last complete kit for an 866 V8 I seen. Harold there might be able to hook you up with one hole if that's all you need. I had alot of that stuff but I sold all my liners a few years ago I have a set of good pistons that were hardly run if you Need some liners are almost extinct. And very pricey. Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191467 Share on other sites More sharing options...
BAD DOG Posted June 30, 2013 Share Posted June 30, 2013 Hey Ryan I found a guy up at the Clifford show with a whole wack of 865 866 V8 parts he wants to sell, I can hunt him down if and see if he'd sell you just what you want, if he has that in his archives he had a lot by the way he talked. Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191772 Share on other sites More sharing options...
rsb502 Posted June 30, 2013 Author Share Posted June 30, 2013 pm sent Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191844 Share on other sites More sharing options...
ducky698 Posted July 1, 2013 Share Posted July 1, 2013 Hi All. hope all is well over there. I spent alot of time sorting out the 866, crank is to far down to fix, E9 liners will fit with some block machining. you can still use the 866 heads. piston pin hieght is the same and will give you a stroked 865/866I ended up putting a 3406 Cat in mine, but if i dont sell the 866 stuff I have it will get built sooner or later.just got the old mack on the road last week.Grant Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191987 Share on other sites More sharing options...
fullfuel01 Posted July 1, 2013 Share Posted July 1, 2013 I bought 8 piston/liner NOS. it was for older V8. I don't remember where I stored them . I do have few older 325 and 375 that I might want to sell. I don't mind havong them but I'll never used them.. Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191988 Share on other sites More sharing options...
hlane3 Posted July 1, 2013 Share Posted July 1, 2013 Fullfuel01 PM sent Quote Link to comment https://www.bigmacktrucks.com/topic/31728-endt865-cylinder-kit/#findComment-191996 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.