Jump to content

Recommended Posts

It has 80psi at the filter while cranking but won't start. Ether it and it fires and runs all day. Sometimes it will start the first thing in the morning but shut it off and it won't start without ether forthe rest of the day. The starter is cranking it plenty fast. My guess is it is not being told to inject fuel during the starting process. It is the gray engine and we switched computers with a 1998 E7 and the 1999 computer will start the 1998 but not vice-versa.

Link to comment
https://www.bigmacktrucks.com/topic/32305-1999-e7-wont-start/
Share on other sites

Check the ground relay, it may be popping open when cranking the engine. This is usually cause by a bad starter pulling too much amperage or internally shorted. Had one eat my lunch doing practically the same thing when I came across the bad relay and starter.

  • Like 1
Link to comment
https://www.bigmacktrucks.com/topic/32305-1999-e7-wont-start/#findComment-199546
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...