Superdog Posted August 24, 2013 Share Posted August 24, 2013 I just bought a junk '89 Hawkeye Eagle grain trailer for the budd wheel axles to put under a '72 Transcraft flatbed that's been in the family since new. I've wanted to put alum. budds on it just to dress it up a little,plus bring the brakes up to date a little,as it still has the old style shoes. Also it has one wheel that I've fought to keep seals in. Anyway,I was really surprised to see when I got the rear wheels off (had to chain rear axle up to drag it home,not much left holding it in) that it had inboard drums. I figured by this late everything had outboard drums. Not that big a deal,since the brakes will last me forever no more than it gets used, but just kinda wonder if anyone else has run across these in the later equipment. Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/ Share on other sites More sharing options...
masterwelder Posted August 25, 2013 Share Posted August 25, 2013 Mike, one of our lease trailers- a 88 Walker tank has the same set up. Fruhauf propar axles with the inboard drums, first one I have seen. I was surprised too. We needed drums and a few wheel studs and got everything without any trouble. Not a bad set up, just hate to have to strip everything down to do a break job. Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201612 Share on other sites More sharing options...
storkmack Posted August 25, 2013 Share Posted August 25, 2013 We have an 89 Benson flatbed and it has inboard hubs. Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201618 Share on other sites More sharing options...
mackcl96 Posted August 25, 2013 Share Posted August 25, 2013 Seen it in 1986 with a Hendrickson lift axle installed at Cobra body companyThe new RW had outboard and the axle they installed was inboard...........no one was happy at first brake job Quote Thanks for hearing me out.You can have the soap box now---------JIM Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201726 Share on other sites More sharing options...
Superdog Posted August 25, 2013 Author Share Posted August 25, 2013 guess they were around a lot longer than I thought,I figured they went out in the late '70's Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201746 Share on other sites More sharing options...
Popular Post storkmack Posted August 25, 2013 Popular Post Share Posted August 25, 2013 guess they were around a lot longer than I thought,I figured they went out in the late '70'sThey should have. 4 Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201769 Share on other sites More sharing options...
farmer52 Posted August 25, 2013 Share Posted August 25, 2013 Perhaps I am the only one who does not know about inboard drums. To the "uneducated" would someone please post a pic of inboard drums. Thanks! Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201801 Share on other sites More sharing options...
Superdog Posted August 26, 2013 Author Share Posted August 26, 2013 an inboard drum is mounted to the backside of the hub,so like on spoke hubs,you have to remove the complete hub/drum assembly to replace the brake shoes.Outboard drums slide over the inner wheels studs on the outside of the hub,take the tires off,remove drum and you can replace the brake shoes without removing the hub. Quote Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201803 Share on other sites More sharing options...
jakebrake86 Posted August 26, 2013 Share Posted August 26, 2013 Yep, I worked for a company once that had about a '95 model Palmer dump trailer that had inboard drums and budds. I thought it was a weird setup. Quote Jake Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201814 Share on other sites More sharing options...
farmer52 Posted August 26, 2013 Share Posted August 26, 2013 an inboard drum is mounted to the backside of the hub,so like on spoke hubs,you have to remove the complete hub/drum assembly to replace the brake shoes.Outboard drums slide over the inner wheels studs on the outside of the hub,take the tires off,remove drum and you can replace the brake shoes without removing the hub.Okay, I understand. Thanks for the explanation. I am used to seeing an outboard drum and makes sense with Budd wheels (or wheels like on a pickup or car). My spoked MH has inboard drums, correct? I will have to look at my GD trailer but it "should" have outboard drums (hub piloted wheels). Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment https://www.bigmacktrucks.com/topic/32450-budd-wheels-inboard-drums/#findComment-201855 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.