gearhead204 Posted August 26, 2013 Share Posted August 26, 2013 I have a 89 e9 450 that went south I got a 95 e9 500 but the air 2 air connections are wrong and the turbo is pushing oil, will my 450 turbo work ok or will I over fuel???? Quote Link to comment https://www.bigmacktrucks.com/topic/32477-e-9-turbos/ Share on other sites More sharing options...
rsb502 Posted August 26, 2013 Share Posted August 26, 2013 Depends on s/n but its the same turbo on most of them from what I can find. The 95 would be set up with the charge air for a CL so depending on what you are putting it in you may need to swap some things. Now would be s good time for a turbo upgrade to keep your egt's down and get some more power if your gonna have to swap it anyway. Being a 95 E9 it should have the Bosch inline pump and the 89 450 may have an Ambac v pump if so the intake manifold is slightly different to fit the longer inline pump, with a little more info on your swap someone can get you pointed in the right direction. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/32477-e-9-turbos/#findComment-201884 Share on other sites More sharing options...
BAD DOG Posted August 27, 2013 Share Posted August 27, 2013 A stock E9 tubo is the same for a 450 as a 500 it will work. 89 to 95 turbo should be the same. if it were pre 85 and had the flange type couplers and air to air piping I would say no. but even if you are going from 89 Ambac to 95 Robert Bosch and you pump is stock and tubos are stock it'll work. the air to air should work too. MH RW CL all same air to air. with an E9. Quote Link to comment https://www.bigmacktrucks.com/topic/32477-e-9-turbos/#findComment-202058 Share on other sites More sharing options...
gearhead204 Posted August 27, 2013 Author Share Posted August 27, 2013 thanks guys, I did get more info. the 1989 e9-450 is a 6t1390 eng seral #with a schwitzer turbo pin#197514 mod# s4d-016 I think, the rivet partly blocked the last 2 numbers on the tag. the e9 500 is a 1995 with a 5n0483 seral # its turbo is a garrett pin# 4465779-2002r mod# tv7124 Quote Link to comment https://www.bigmacktrucks.com/topic/32477-e-9-turbos/#findComment-202066 Share on other sites More sharing options...
gearhead204 Posted September 3, 2013 Author Share Posted September 3, 2013 ok guys think I got it perfected I used one pipe from the cl700 from cooler to intake. i'll use the one from the rw713 from cooler to turbo,the flange mount turbo appears to be tall enough to clear the intake on the e9-500 with inline pump. Quote Link to comment https://www.bigmacktrucks.com/topic/32477-e-9-turbos/#findComment-203381 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.