Phil Bennett Posted September 6, 2013 Share Posted September 6, 2013 Hello. Wonder if anyone out there can help ? Am based in England (UK) and have a R719LS (1970).It's has the quadreplex gearbox set up (5spd + 4 spd) and is fitted with a PTO located on the passengers side of gearbox.I'd like to remove said PTO and 'blank off', but has anyone any advice before I just go undoing bolts etc. Will oil flow out ? Will internal parts fall out ? I'm sure I can have made up a suitable 'blanking off' plate securely affixed and sealed.Any suggestions welcome.ThanksPhil Quote Link to comment https://www.bigmacktrucks.com/topic/32648-pto-removal-from-quadraplex/ Share on other sites More sharing options...
j hancock Posted September 6, 2013 Share Posted September 6, 2013 Straight forward. Remove the bolts and cover back up. Yup, there is oil there.May want to remove the drain plug from trans. so oil draining will be more under control!Shouldn't have any loose parts.PS. We will need pictures! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/32648-pto-removal-from-quadraplex/#findComment-204132 Share on other sites More sharing options...
Superdog Posted September 6, 2013 Share Posted September 6, 2013 Chances are there will be longer studs holding the PTO on,you'll have to remove them and replace with short bolts to hold the cover plate. Quote Link to comment https://www.bigmacktrucks.com/topic/32648-pto-removal-from-quadraplex/#findComment-204148 Share on other sites More sharing options...
Brian Blaylock Posted September 7, 2013 Share Posted September 7, 2013 I'm sure if you ask around on here someone has a spare cover they would be willing to let go of Quote Link to comment https://www.bigmacktrucks.com/topic/32648-pto-removal-from-quadraplex/#findComment-204280 Share on other sites More sharing options...
skip Posted September 25, 2013 Share Posted September 25, 2013 How did you find an R719 in England? They are a rare truck. As mentioned above, drain oil first, undo the nuts on your PTO/pump assembly, remove PTO//pump assembly, then a gear adapter comes off behind it. You will be left with long studs. Best way is to remove studs and replace with short bolts to go through your cover. Skip Quote Link to comment https://www.bigmacktrucks.com/topic/32648-pto-removal-from-quadraplex/#findComment-208422 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.