rustydog Posted October 8, 2013 Share Posted October 8, 2013 Want to check with the experts here....any diagrams of wiring....12v neg ground....I have elec. starter, voltage regulator, relay switch(3pole), ign. switch, and start button..if possible suggested wire sizes for each as well....thanks...rusty Quote Link to comment https://www.bigmacktrucks.com/topic/33078-not-an-electrician-by-any-stretch/ Share on other sites More sharing options...
Pawel Posted October 8, 2013 Share Posted October 8, 2013 Hello!How about this one for starters:Even if it doesn't show the first relay, we can go on from here by the numbers. I'm also familiar with the european wire gauges, but look up "AWG wire gauges" to see for what current they are rated. Now the connection from 1 (battery) to 4 (the final relay on the bendix) should be the fattest copper you can practically put in there. From 1 to 2 (Ignition and starter switch - they are shown here as one switch, but will be separate for your aplication) doesn't have to be very thick, but make it solid, for reliability. The copper inside has to be about 1mm in diameter or more. Let's hope others provide more data, hope it helps and good luck with your installationPaweł Quote Link to comment https://www.bigmacktrucks.com/topic/33078-not-an-electrician-by-any-stretch/#findComment-210802 Share on other sites More sharing options...
j hancock Posted October 8, 2013 Share Posted October 8, 2013 Go into the Big Macks Wiki (listed on the toolbar section) and there are wiring diagrams for B's and R's with wire gauge, colors and how everything is to be set up. Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/33078-not-an-electrician-by-any-stretch/#findComment-210810 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.