Popular Post slpwlker Posted October 27, 2013 Popular Post Share Posted October 27, 2013 After they couldn't lift the can with the 724K they brought in the heavy artilleryGot a vid of it lifting the can and can't find it now 6 Quote Link to comment Share on other sites More sharing options...
j hancock Posted October 27, 2013 Share Posted October 27, 2013 Wonder what is inside?Was the delivery address Ft Knox? Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
rsb502 Posted October 27, 2013 Share Posted October 27, 2013 Too heavy for a 724k huh? I guess you didn't try to drag it then, were they over their 20k weight estimate? Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Green Dash Posted October 27, 2013 Share Posted October 27, 2013 A 20' container has a payload limit of around 44k lbs. I'm guessing this one is maxed out. Quote Jim Link to comment Share on other sites More sharing options...
thomastractorsvc Posted October 27, 2013 Share Posted October 27, 2013 Hope you didn't have to pay for its help Quote Robert"I reject your reality and substitute my own." Link to comment Share on other sites More sharing options...
rsb502 Posted October 27, 2013 Share Posted October 27, 2013 They put a lot more than 44 in those 20 footers. I pulled cans for a year and the heaviest were 20' loaded with marble, granite and copper pipe. I was always over 80k with those loads, only 40' over gross I pulled was hardwood for export (around 85-90k) and a magnet wire machine brought in from Japan. I was running 98,000 with that one, nobody else would pull it but the ol E9, with 44 camelback rears and 4.42's didn't even notice. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Green Dash Posted October 27, 2013 Share Posted October 27, 2013 I thought I'd seen 67,200# on the back door of some of the 20's. Quote Jim Link to comment Share on other sites More sharing options...
slpwlker Posted October 28, 2013 Author Share Posted October 28, 2013 Too heavy for a 724k huh? I guess you didn't try to drag it then, were they over their 20k weight estimate?yes I am almost 82k Quote Link to comment Share on other sites More sharing options...
slpwlker Posted October 28, 2013 Author Share Posted October 28, 2013 I had to pay. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted October 28, 2013 Share Posted October 28, 2013 well theyre only 10k over then your around 50k lt wt aren't ya, 30k for the box and load aint bad, hell that skid is probably 5k. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
slpwlker Posted October 28, 2013 Author Share Posted October 28, 2013 well theyre only 10k over then your around 50k lt wt aren't ya, 30k for the box and load aint bad, hell that skid is probably 5k.Since I didn't get a chance to get a new empty weight. I am going with my old one of 57k. Still heavier then 20k Quote Link to comment Share on other sites More sharing options...
rsb502 Posted October 28, 2013 Share Posted October 28, 2013 10-4 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
mowerman Posted October 28, 2013 Share Posted October 28, 2013 had a 40 ft can one time,,had about 60 G,s worth of tuna on it.lol...was grunting and groaning only moved it around 30 miles from port,,,no scales,,,they generally load the piss outa those things...bob Quote Link to comment Share on other sites More sharing options...
other dog Posted October 31, 2013 Share Posted October 31, 2013 had a 40 ft can one time,,had about 60 G,s worth of tuna on it.lol...was grunting and groaning only moved it around 30 miles from port,,,no scales,,,they generally load the piss outa those things...bobthat's right Bob, i've seen them load the same 13 pallet load of kyanite that we haul in a 20' container. It weighs about 46,000 lbs. They had to double stack some pallets,crammed it in there,and then had to push the doors in with the forklift to get them closed. Quote Producer of poorly photo-chopped pictures since 1999. Link to comment Share on other sites More sharing options...
RFCDrum Posted October 31, 2013 Share Posted October 31, 2013 Did anyone notice the walking beam Mack suspension and rears. Very cool. Quote Link to comment Share on other sites More sharing options...
slpwlker Posted October 31, 2013 Author Share Posted October 31, 2013 It had the cones on the end of the axles. It had some big rears Quote Link to comment Share on other sites More sharing options...
rsb502 Posted October 31, 2013 Share Posted October 31, 2013 Yeah that Mack is heavy alright, I bet it rides like crap with solid rear suspension, those could be 44k rears with 8 bolt cone axles, I don't remember what the 58k rears look like on the ends, I bet the NY guys do though. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
RFCDrum Posted November 1, 2013 Share Posted November 1, 2013 They look like 58's on walking beam with those size cones but might be 65's. Hard to tell with Budd rims. Quote Link to comment Share on other sites More sharing options...
rsb502 Posted November 2, 2013 Share Posted November 2, 2013 When did they go to the 8 and 10 bolt axles is it 65k or over that, or did they do away with them and go back to 8 bolt? I posted above they could be 44's without thinking 44's are 6 bolts not 8, I think the 58's are 8 bolt now but I know ive seen some 10 bolts somewhere. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
2stacksuperdog Posted November 2, 2013 Share Posted November 2, 2013 these are 65's i believe. Quote Matt Link to comment Share on other sites More sharing options...
RFCDrum Posted November 2, 2013 Share Posted November 2, 2013 The extra rib on the center of each spoke indicates 65's I believe as the 58's don't have that. But still how do you tell with Budd rims? Quote Link to comment Share on other sites More sharing options...
Brian Blaylock Posted November 3, 2013 Share Posted November 3, 2013 Who's rig up tandem is that and where was it located Quote Link to comment Share on other sites More sharing options...
ap40rocktruck Posted November 4, 2013 Share Posted November 4, 2013 The extra rib on the center of each spoke indicates 65's I believe as the 58's don't have that. But still how do you tell with Budd rims?The heavy cone cap with Budd wheels on Mack hard bar indicate 65K rears. If it had camel back springs then 58K or 65K. If the caps are flat with 6 bolts then they would be less 55K & below. Quote Richard MarkOwner / Master Model Maker Industrial Model DesignAp40rocktruck Link to comment Share on other sites More sharing options...
rsb502 Posted November 7, 2013 Share Posted November 7, 2013 The heavy cone cap with Budd wheels on Mack hard bar indicate 65K rears. If it had camel back springs then 58K or 65K. If the caps are flat with 6 bolts then they would be less 55K & below.I knew somebody would have the info. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
rsb502 Posted November 7, 2013 Share Posted November 7, 2013 I didn't notice until today that it had a 425 for a tag axle tire, the drives look taller than the 425, they have to be 12.00R 24's, Michelin shows them at 49" tall, the 425 XZY Michelin shows to be 44", I bet those Michelin 12.00R24's aren't cheap but you gotta pay if you wanna play I guess. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.