Jump to content

Recommended Posts

Time for this superliner to find a new home. I am located in Washington State. The truck sat a lot for the last 6 to 8 years is what the previous owner said. Has some damage to the hood and some minor rust on the cab. However the rear suspension looks new and the rear brake drums/ brake linings are newer. The engine was swapped out with a 350 Big cam but no idea the mileage. Has 10 speed fuller trans. Needs wiper valve replaced. Truck runs and drives nice. I have the truck listed on craigslist for $4200 but willing to give a member on BMT a better deal.

post-10749-0-62697000-1383619343_thumb.j

post-10749-0-32405700-1383619354_thumb.j

post-10749-0-02075900-1383619369_thumb.j

Link to comment
https://www.bigmacktrucks.com/topic/33382-1980-rws747-with-350bc3/
Share on other sites

If it was closer to Illinois I would be interested. Seems like all the deals come up half way across the country :(

It runs, go drive it home its not that far, trucks are made to run the road.

  • Like 1

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

It runs, go drive it home its not that far, trucks are made to run the road.

Yes I know, but having to travel close to a thousand miles to inspect a truck that's not been driven in 6 to 8 years and just jump in and head home is not for me.. ;) it would be much easier if it were closer .. My father has stories I've heard of flying a few guys out to drive mixers home and when the got to their destination the drums on the trucks had been chipped out with sledge hammers... From the outside...nothing like the pictures he had received... Needless to say they flew back home

Not saying this would be the case with this listing..... Just something to think about ...lotta miles from home And lotta extra cash to travel

I am not sure on the rearends. The rear shackles are labeled Rayco. I forget the name of the type suspension that it is but consists of four leaf spring packs. The springs still have stickers on them so I believe they were replaced before it was parked. I have a few more pictures of the truck that I can post again. I have been busy so I have not worked on the truck much lately. Did manage to get the dash lights working. I still plan on changing the engine oil and filters. It could use some new steer tires.

post-10749-0-25553800-1383716689_thumb.j

post-10749-0-61407300-1383716701_thumb.j

post-10749-0-50136800-1383716746_thumb.j

post-10749-0-39225800-1383716754_thumb.j

post-10749-0-64427900-1383716765_thumb.j

post-10749-0-90602400-1383716771_thumb.j

post-10749-0-10480400-1383716791_thumb.j

post-10749-0-59185500-1383716797_thumb.j

post-10749-0-35111700-1383716806_thumb.j

  • Like 1

Are you sure the Cummins got swapped in? Sure it's not a factory Cummins truck? All I've ever heard that suspension called is 4 spring. It looks good, man. I wish it wasn't so far away.

Jake,it woulda been a factory Cummins truck,just not a 350. a 747 would have been a 290 or 300 Cummins. with the 350 it woulda been a 767.

I am quite surprised to not have any offers on the Mack yet. Usually get at least some low ball offers from the craigslist adds. I figured someone would have made an offer of $3400 and been driving themselves home in a superliner.

Sir, I would be interested in your truck, I recently bought a 40EF in Duvall, WA. The problem I have is getting it to TN. Thought about buying something around here and driving out there, but if I can buy your truck and find a trailer out there, load the 40EF and my car and drive it all back here, that would work for me. I have some experience with road trips and willing to take a chance. Any help you can provide me would be greatly appriecated. Plan on restoring the EF, but if anyone else would be wanting the Superliner I would willing to make a deal.

is this truck on the east or west side? how long is it from back of cab to back of frame? i'm guessing that with the rayco suspension that it's a rw613? whats the frame thickness 1/4 5/16 or 3/8 i'm thinking of building a dump truck after a suspension change call me if you want rob @ 509 846-6312

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...