bobo Posted November 30, 2013 Share Posted November 30, 2013 I have to change the starter on my '89 E9. It's a 42mt, has anybody put a 39mt starter on? bobo Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/ Share on other sites More sharing options...
bobo Posted December 1, 2013 Author Share Posted December 1, 2013 So...Nobodys ever had to replace the starter on their E9? Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-219428 Share on other sites More sharing options...
rsb502 Posted December 1, 2013 Share Posted December 1, 2013 I haven't but mine is still 24 volt, I have pondered swapping to a high torqe 12volt. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-219432 Share on other sites More sharing options...
ws721 Posted December 1, 2013 Share Posted December 1, 2013 42 mt? I thought they were bigger than that. Locaol E9 expert told me it was a 52 mt? What is the 12 volt equivlent? Quote Remember if it's got a hood it's no good! Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-219438 Share on other sites More sharing options...
rsb502 Posted December 12, 2013 Share Posted December 12, 2013 I haven't done it yet but my local starter shop said to use a 12v 50mt Delco for mine. 2 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-221027 Share on other sites More sharing options...
kscarbel Posted December 12, 2013 Share Posted December 12, 2013 Delco 50MT Type 400. Stay with 24 volt, do not change to 12 volt.http://www.bigmacktrucks.com/index.php?/topic/33515-mh-master-kill-switch-area/ 1 Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-221029 Share on other sites More sharing options...
bobo Posted December 20, 2013 Author Share Posted December 20, 2013 thank you bobo Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-222247 Share on other sites More sharing options...
BAD DOG Posted January 1, 2014 Share Posted January 1, 2014 All the E9s I've had we're already 12volt . My MH had been switched to 12 before I got it. Only reason I knew it had been 24 previously is because they left the series parallel switch on the shifter stand with all the wires cut off. I put a new starter on it when I rebuilt the engine only because it was one of the only things I hadn't replaced and it was already off to take the oil pan off. If it's wired for a 24 volt system I'd just leave it. But if you change it to a 12 volt it's simpler and will start an E9 with ease too. Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-224305 Share on other sites More sharing options...
BAD DOG Posted January 1, 2014 Share Posted January 1, 2014 I'd have to look the part # of that starter I put on mine up in about 8 years backs bills but I I remember right 12v 50mt sounds right. Everyplace carries them they're a pretty common 12volt starter vs the 24volt ones. Quote Link to comment https://www.bigmacktrucks.com/topic/33686-e9-starter/#findComment-224306 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.