scottwetzel Posted December 26, 2013 Share Posted December 26, 2013 Has anyone on here done any custom flooring or made there own carpeting? My carpet needs replaced bad in the superliner and I'm just deciding if I should go with the factor stuff or do something a little different. Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/ Share on other sites More sharing options...
rsb502 Posted December 26, 2013 Share Posted December 26, 2013 I had a new front carpet but can't get the rear and the firewall pieces so I've been pondering hardwood look laminate, found so.e that is 3/8" thick and looks like rough cut old wood(shows saw marks etc). I may end up trying it out just for the hell of it, its actually cheaper than having a carpet made for it. 1 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223189 Share on other sites More sharing options...
scottwetzel Posted December 26, 2013 Author Share Posted December 26, 2013 I had a new front carpet but can't get the rear and the firewall pieces so I've been pondering hardwood look laminate, found so.e that is 3/8" thick and looks like rough cut old wood(shows saw marks etc). I may end up trying it out just for the hell of it, its actually cheaper than having a carpet made for it.The factory stuff is expensive. I was thinking about putting bed liner spray in the inside just to protect it. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223199 Share on other sites More sharing options...
BAD DOG Posted December 26, 2013 Share Posted December 26, 2013 You should be able to get automotive carpeting to match somewhere. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223209 Share on other sites More sharing options...
keg1 Posted December 26, 2013 Share Posted December 26, 2013 Im putting hardwood laminate in mine if I ever get time to get back working on it. Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223218 Share on other sites More sharing options...
rsb502 Posted December 27, 2013 Share Posted December 27, 2013 Mack doesn't have carpets for R series cabs anymore, they have the rubber floor mat but that's it, I was going to just use blue automotive carpet and have replacements made at a local upholstery shop but I haven't had a wood floor in a truck yet so I will probably put in some dynamat and lay the laminate down with brushed aluminum strips on the edges. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223248 Share on other sites More sharing options...
gearhead204 Posted December 27, 2013 Share Posted December 27, 2013 I used some interlocking rubber shop floor mats in a tractor cab, great noise and heat reduction plus it comes apart easy for service work and was very easy to cut and install. for a truck cab I think a patch of alum. diamond plate just in front of the pedals would work fine. Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223255 Share on other sites More sharing options...
theakerstwo Posted December 27, 2013 Share Posted December 27, 2013 When I was a ever day working mechanic and a truck came in the shop with that hard wood floor in it no one wanted to work on it. One reason that is is if the the trans had to come out of it.I saw a KW in the shop one day with red woor flooring in it and it was not even pretty.The trans need rebuilt and rear of engine resealed.This guy had it screw down to were it would take half a day to get the shifter out.That is what runs the labor cost up in the shops.He could not see why it was not a standard labor cost. 1 Quote glenn akers Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223256 Share on other sites More sharing options...
Dirtymilkman Posted December 27, 2013 Share Posted December 27, 2013 The last truck I rebuilt mack wanted $450 for the CH style carpet. The salesman ordered it in and let met take it to a upholstery Shop to get copied. The carpet guy laughed and said that was the cheapest crap he saw. He cut me heavier carpet with better padding and did it for $89. Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223296 Share on other sites More sharing options...
scottwetzel Posted December 27, 2013 Author Share Posted December 27, 2013 The last truck I rebuilt mack wanted $450 for the CH style carpet. The salesman ordered it in and let met take it to a upholstery Shop to get copied. The carpet guy laughed and said that was the cheapest crap he saw. He cut me heavier carpet with better padding and did it for $89.That's a pretty nice hook up!!! Quote Link to comment https://www.bigmacktrucks.com/topic/34019-custom-flooring/#findComment-223300 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.