MightyFruit Trucking Posted January 29, 2014 Author Share Posted January 29, 2014 Checked with Bibeau and the recommend I get Bibeau BFL-S for the type of primary work I do here in ohio. They said that the beds hold up well the floor is just a little thiner 3/16 opposed to 1/4 on the BMT model and it weights 1000 pounds less. The high lift gate will run $1,600 more for that option. Quote Link to comment Share on other sites More sharing options...
Joe Ditchkus Posted January 29, 2014 Share Posted January 29, 2014 Bibeau,Beaurock and Brandon are all similar bodies as I was told Beaurock and Brandon are spinoffs from Bibeau.Different family members spun them off. I have Brandon hi-tensile with 3/16" floor and 1/8" sides it works well with rip rap and table tops(concrete cut offs). I ordered the 1/4" gate I would not do again because of extra weight. If you order the hi-lift gate it is definitely not necessary. A feature Bibeau has is on gate hinges they have a triangle piece of metal to keep gate lined up if any wear in pins. Joe D. Quote Link to comment Share on other sites More sharing options...
2stacksuperdog Posted January 29, 2014 Share Posted January 29, 2014 Smooth side bodies are the way to go especially if your going to haul salt. Once its in the ribs theyre gone Quote Matt Link to comment Share on other sites More sharing options...
RFCDrum Posted January 29, 2014 Share Posted January 29, 2014 Bibeau,Beaurock and Brandon are all similar bodies as I was told Beaurock and Brandon are spinoffs from Bibeau.Different family members spun them off. I have Brandon hi-tensile with 3/16" floor and 1/8" sides it works well with rip rap and table tops(concrete cut offs). I ordered the 1/4" gate I would not do again because of extra weight. If you order the hi-lift gate it is definitely not necessary. A feature Bibeau has is on gate hinges they have a triangle piece of metal to keep gate lined up if any wear in pins. Joe D.This is true they are all related. Rob Quote Link to comment Share on other sites More sharing options...
Joe Ditchkus Posted January 30, 2014 Share Posted January 30, 2014 When I said I ordered the 1/4" gate I want to say that the heavier gate is not necessary with the hi-lift gate as when lifted nothing will hit it. Joe D. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.