bobo Posted February 7, 2014 Share Posted February 7, 2014 Hey I weighed my 89 Rw713 V8 today and was kinda surprised it was so heavy? 9800kg/21,6000# full of fuel. does that seem right? bobo Quote Link to comment Share on other sites More sharing options...
j_martell Posted February 7, 2014 Share Posted February 7, 2014 1988 RD688S roll off: 13,500kgs bare rail full of fuel2011 GU813 roll off:14,500kgs bare rail full of fuel 1 Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment Share on other sites More sharing options...
Back In Black Pulling Posted February 7, 2014 Share Posted February 7, 2014 My 85 weights 19800 with the pulling hitch and the 1000 lbs extra that i added Quote Link to comment Share on other sites More sharing options...
bobo Posted February 7, 2014 Author Share Posted February 7, 2014 My 85 weights 19800 with the pulling hitch and the 1000 lbs extra that i addedIs your a 600 or 700? Quote Link to comment Share on other sites More sharing options...
Back In Black Pulling Posted February 7, 2014 Share Posted February 7, 2014 613 Quote Link to comment Share on other sites More sharing options...
bobo Posted February 7, 2014 Author Share Posted February 7, 2014 just kinda threw me for a loop when I looked at the scale! good thing trailer only weighs 16,400 bobo Quote Link to comment Share on other sites More sharing options...
Superdog Posted February 8, 2014 Share Posted February 8, 2014 Super Mutt weighs rite at 20,000# full of fuel. 1 Quote Link to comment Share on other sites More sharing options...
rsb502 Posted February 8, 2014 Share Posted February 8, 2014 I have never filled the fuel tanks on the 85 but it weighed in at 18,800# before I stretched it, RW613,double frame, V8, Eaton trans Mack 44 rears,bout 1/4 tank. The 84 was an RWS722LST double frame, V8, 12spd, Mack 44 rears and it was 19200# as a daycab with a 226"wb. I think the 93 CH613 E7, Mack 9 spd, Mack rears on air, single frame was 18,000# full of fuel. Macks aint light, but theyre sturdy, I think the flat top Freightliner Classic i had at Howard Baer with a Series 60, Eaton 10 spd and about a 245" wb was around 16000#, but i would rather have a Mack. 1 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
fullfuel01 Posted February 8, 2014 Share Posted February 8, 2014 My 02 CH, 427 10 speeds, 12x40 mack air ride single frame and my quad axle weight 17800kg. Very very light.My 1991 rw713 sleeper e6-350 18 mack 12x44 244wb was about 20000kg with the same trailer.My 2009 plastic gu713 daycab mp8 485 18 fuller 18x46 was a little over 21000kg if I remember right. 1 Quote Link to comment Share on other sites More sharing options...
jackb61sx Posted February 8, 2014 Share Posted February 8, 2014 My 89 RW-753, double frame, 50,000lb rears, 14,300lb front, 8LL as extras truck has a steel hyd tank, steel head board and steel push plate rear and tow plate rear with all that weighing in at the trimmed down weight of 19,160 lbs on a 204" wheel base and a 425hp cat. 1 Quote Link to comment Share on other sites More sharing options...
bobo Posted February 8, 2014 Author Share Posted February 8, 2014 its a 89 713 e9 18spd eaton mack 44 on heavy camel back 140 gallon tanks Quote Link to comment Share on other sites More sharing options...
blackdog2 Posted February 8, 2014 Share Posted February 8, 2014 I weigh in @ 31740 # with my 24 ft fruehauf dump trailer and 120 gallons fuel.RW- 713 1 Quote Ed Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.