Jump to content

May have dissapointed Other Dog


randyp

Recommended Posts

Cousin Other Dog says the P in my name stands for "Professional". I may have let him down today. 28 degrees this morning, freezing rain, occasional sleet, wind, etc, and I decide to bottle ass off to a Siberian mud bog on dozer and manage to sling a track. I don't even know why I was out there today.

post-4330-0-31969600-1392075256_thumb.jp

  • Like 1
Link to comment
Share on other sites

what did you do , wreck your thumb on the exc. ifin you did I will take back the pro remark. I did the same thing but tore the face of the boom . that's what happens when you pick a 53' flatbed and one side hits the pile while your moving it.

We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful.

Link to comment
Share on other sites

what did you do , wreck your thumb on the exc. ifin you did I will take back the pro remark. I did the same thing but tore the face of the boom . that's what happens when you pick a 53' flatbed and one side hits the pile while your moving it.

Yeah GG, I told you I lost my "Pro" status, I wadded that thumb up a while back, loading cement slabs. I gotta repair it, using lil heavier steel, or find some lighter cement (and I don't look for that to happen). I actually was being pretty careful with it, and then got stupid (or stupider) and boomed stick boom out just a lil too far with a really big chunk. I bleeeve its called "Surpassing the structural integrity". I really miss it, gotta fix it, handier than horns on a goat,,oops,,did I say that? randy----(sniff,,,I miss my p)
Link to comment
Share on other sites

Sounds like to me maybe the "P" stands for Perseverance? not giving up when there's a problem? stick with it and get it done,thats the difference!...................................Mark

Thank you Mark!! You always see the good side of things! Now I feel better, not any less sore or greasier,,,but better! randy---(half a p, but coming back)
Link to comment
Share on other sites

Glad to see you got the track back on . Myself , my grandfather & his small crew has been in that situation w/ a few pieces of equipment .

Seem like they always slip off in the worst places .

Never No fun when a track slips off & its hell getting back on esp when your by yourself .

:mack1:

You Cant Fix Stupid. But You Can Numb It With A Sledgehammer. :loldude:

Link to comment
Share on other sites

Glad to see you got the track back on . Myself , my grandfather & his small crew has been in that situation w/ a few pieces of equipment .

Seem like they always slip off in the worst places .

Never No fun when a track slips off & its hell getting back on esp when your by yourself .

:mack1:

I had a good helper, we stayed on the same page and still got all our fingers and toes,,tracks can be deadly randy----(lil p)
  • Like 1
Link to comment
Share on other sites

if you ever put a hyd thumb on that machine you wouldn't know what you ever did with out on before, even a hyd. over manual one. I use mine all the time and when its not thumb time its magnet time. found pic of broken thumb and my hyd. magnet.

post-3449-0-35888900-1392082359.jpg

post-3449-0-50625600-1392082367.jpg

We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful.

Link to comment
Share on other sites

Sure Right about tracks being deadly had a few close calls myself . amazed I still have all my digits weather they work or not ...lol (those who know my situation get that joke ..lol)

we used to do our own undercarriage work ( only thing we didn't mess w/ was putting new pads on rails we let undercarriage shop in Memphis do that for us)

I Never minded dealing w/ pulling old undercarriage off & putting new on as we had most everything to do it with including a railroad hammer & 20 lb sledge hammer to help knock master pins in & out with.

I always liked the alligator clip style rails over the master pins . get the rails lined up , put the pad on & bolt it down .

But I always would rather take a country ass whoopin than put a slipped track back on . I Used to invent cuss words while putting a slipped track back on ...lol

GG: We had a manual thumb on our track hoe as we done a lot of clearing work.

never had a hyd thumb but those manual thumb was handy esp when doing undercarriage work . ;)

:mack1:

You Cant Fix Stupid. But You Can Numb It With A Sledgehammer. :loldude:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...