LSI Posted February 16, 2014 Share Posted February 16, 2014 Any one have traction control on their new Mack or Volvo?How does it work for you?It is a $900 up charge on new truck.Do you think its worth it if running Mn,Wi, in winter? Quote Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/ Share on other sites More sharing options...
j_martell Posted February 16, 2014 Share Posted February 16, 2014 IMHO, traction control is for guys who don't get it....everything I drive has traction control, my right foot! Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/#findComment-232817 Share on other sites More sharing options...
bbigrig Posted February 20, 2014 Share Posted February 20, 2014 I have one truck that has traction control which is basically part of your ABS system with an extra valve. Its freakin useless! It actually causes more issues in getting stuck in the snow up here in Canada then it helps. Cuts the motor back and applies slight brake pressure to a slipping wheel. It will cut your accelerator pedal down to idle on a major slip. (Useless!) The other new truck we have, we tested 4- way lockers on Meritor axles. The full lockers are the way to go if you need the extra traction. I have yet to get that truck stuck but it means a heavier more expensive truck.Don't bother with the ATC traction control. I have yet to get into a situation that ATC has helped me get out of. Cutting the throttle down has actually got me stuck twice. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/#findComment-233601 Share on other sites More sharing options...
John R Snyder Posted March 21, 2014 Share Posted March 21, 2014 I agree that it is the most worthless thing, and the local dealer tells me there is no way to turn it off on my truck. Does anyone know if this is true or is there a way? Quote Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/#findComment-238371 Share on other sites More sharing options...
bbigrig Posted March 21, 2014 Share Posted March 21, 2014 Cause an ABS fault and it all goes away. unplug a wheel end sensor or something. The light on the dash will be on and your braking system will return to before ABS. Your traction control will also no longer function until you plug the sensor back in and spin the wheels over 4mph.I would only do this if you are REALLY stuck somewhere then put it back to normal. Quote Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/#findComment-238387 Share on other sites More sharing options...
Bullheaded Posted March 21, 2014 Share Posted March 21, 2014 I had traction control on my CH that was pulling wood chip trailers. I had to load in places with axle deep mud. It made the truck useless. It wouldn't go anywhere. Got it turned off and I could get in and out no problem. Does exactly like bbigrig says.....you try and get through a bad spot and it derates the engine, applies brakes, you lose momentum, and there you sit.....stuck. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/34698-traction-control/#findComment-238470 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.