bullhauler Posted March 10, 2014 Share Posted March 10, 2014 I have a 89 R690ST and the powerdivider is out on it, my question is what size socket does it take to remove the peanuts and the socket that they ride in? Have not taken apart yet as I know I need a large socket to remove and want to purchase one before I start, This is for the nut inside after you get the yoke and front cover off.This one is also a auto locking and not air locking if it makes any difference. Thanks for any advise, Terry Quote Link to comment Share on other sites More sharing options...
j_martell Posted March 11, 2014 Share Posted March 11, 2014 Take pics please.....might make a good add to the wikki if it's not in there already Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment Share on other sites More sharing options...
bullhauler Posted March 11, 2014 Author Share Posted March 11, 2014 Found out from a friend of mine that has a lot of Macks that it takes a 6 point, 3 1/8" socket, got it ordered will be here tomorrow. Thanks,Terry Quote Link to comment Share on other sites More sharing options...
bullhauler Posted March 12, 2014 Author Share Posted March 12, 2014 Got the power divider all apart and ordered the parts today, just shy of $1400 to fix up again, needed new peanuts, cage,inner and outer cams, and couple seals, gonna pick up parts tomorrow and put back together. The size of the socket to remove the outer cam is a 3" got a 3 1/8' and was to big so I made one out a out of some 3/16 flat and bent like a socket and it worked just like a $50 boughten one. I had it apart in a little over a hour. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.