Jump to content

Recommended Posts

Just throwing this out there.....our rock vac ran with a reaaalllllyyyyy clogged air filter for a long time, and as a result the compressor started pulling oil and eventually needed rebuilt. Couldn't get air anywhere else, so it was pulling vacuum from its "crankcase" (don't know the property term, but you all should get it). Just did the rebuild (new rings and gaskets etc and a good cleaning) last week and it hasn't run it on site yet, but all seemed ok when we tested it in the shop.....

Lack of planning on your part does not constitute an emergency on my part....

The same thing can make a turbo pull oil thru the seals too, how much oil? Is it dripping out of the crankcase vent tube, or are there a few drops under it after it sits a while?

"Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin

"If your gonna be STUPID, you gotta be TOUGH"

"You cant always get what you want, but if you try sometimes you get what you need"

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...