MACKTRUCKS4 Posted May 25, 2014 Share Posted May 25, 2014 This cooler was attached to the right frame rail on the 88 Superliner I'm saving. I don't understand how this could work. Both lines went to the two drain plugs on the bottom. Any thoughts? Quote Live every day like it's your last, because one of these days, it will be. Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/ Share on other sites More sharing options...
hatcity Posted May 25, 2014 Share Posted May 25, 2014 usually has a pump inside the transmission. Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/#findComment-246883 Share on other sites More sharing options...
j_martell Posted May 25, 2014 Share Posted May 25, 2014 That's how fuller does it..... And the cooler is built into my rad.... Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/#findComment-246888 Share on other sites More sharing options...
hatcity Posted May 25, 2014 Share Posted May 25, 2014 my trans cooler hangs down below the rad. Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/#findComment-246895 Share on other sites More sharing options...
MACKTRUCKS4 Posted May 26, 2014 Author Share Posted May 26, 2014 My 8LL's have a pump and the oil fittings are on the side where the lines run to a cooler next to the engine oil cooler, but these lines were hooked to the drain plugs on the bottom of the 12 speed. 12's have a small oil pump that runs off the input shaft and only oils the front bearing. No lines come out to run the oil to a cooler. Quote Live every day like it's your last, because one of these days, it will be. Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/#findComment-246993 Share on other sites More sharing options...
mrsmackpaul Posted May 26, 2014 Share Posted May 26, 2014 my 12 speed has no cooler and as above only pump on the input shaft so cant see how that cooler is gonna work any good ??????Paul Quote Link to comment https://www.bigmacktrucks.com/topic/35862-12-speed-trans-cooler/#findComment-247022 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.