6368 Posted June 21, 2014 Share Posted June 21, 2014 I have a 2ve6-350 that was air to air and i want to change it to tip turbine so it will fit in my b61. i also have a complete 285 that i can get parts from. What were the differences between tip turbine 350s ( endt678?) and front mounted air to air e6-350s. I was going to just put the 285 in the truck but i would much rather have the econdyne than maxidyne. Quote Link to comment https://www.bigmacktrucks.com/topic/36109-2v-e6-350-change-to-tip-turbine/ Share on other sites More sharing options...
Superdog Posted June 21, 2014 Share Posted June 21, 2014 I'm pretty sure most if not all the tip turbine 350's had the water cooled aftercooler,whereas the 676 's didn't,that's the only external difference I can think of. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/36109-2v-e6-350-change-to-tip-turbine/#findComment-250002 Share on other sites More sharing options...
6368 Posted June 21, 2014 Author Share Posted June 21, 2014 I don't know that much about tip turbine. i thought they all were had water cooling. Anyway the one i has two small water pipes going into the front of it. s One thing i have been wondering about is the turbo. will the one from the e6-350 work with the tip turbine. Quote Link to comment https://www.bigmacktrucks.com/topic/36109-2v-e6-350-change-to-tip-turbine/#findComment-250056 Share on other sites More sharing options...
j hancock Posted June 22, 2014 Share Posted June 22, 2014 Yes, that is water cooled.I have a 285 setup and it is "dry".Turbo should be ok. Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/36109-2v-e6-350-change-to-tip-turbine/#findComment-250072 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.