Jump to content

Recommended Posts

Hello!

This weekend I had the opportunity to do some 1:1 work and I got to work on my wheels. I had the problem of the oil lamp blinking randomly. After some reading I decided the thing was a problem of a bad electrical contact. After I crimped a new contact on the wire the lamp now works as it's supposed to, so I guess I have that confirmed. The biggest problem was to get the access to the oil sensor - in order to do that, you have to take down a large tub, a piece of sheet metal that protects the engine from the underside. In order to do that I had to jack my baby up - and here's how we did it with my pops:

IMG_0200.JPG

Well the electrical work took me 10 minutes. Taking down that tub and reinstalling it afterwards - over an hour. But at least I have a reliable oil pressure warning now! Thanks for looking and have a nice day

Paweł

Link to comment
https://www.bigmacktrucks.com/topic/36277-crawling-under-my-van/
Share on other sites

Thanks a lot for your comments, gentlemen!

Freghtrain - they pack 'em up pretty tight, don't they?

Bob - I like my van a lot!

Jim - a little air time? Nah, some other time maybe.. :-))

Bobby j - most important was to get the job done!

Vlad - don't worry, those bricks were ours, they'll end up in our driveway!

Thanks again, and have a nice day!

Paweł

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...