gicknordon Posted August 6, 2014 Share Posted August 6, 2014 My dad has a 1987 mack tandem dump truck. The t- 2060 transmission was run low on oil and either needs replaced or rebuilt. The guy he usually take his transmissions to says it might be worth it to get a reman or rebuilt since running it low on oil might have changed the temper on the smaller gears. My question is is there any other make transmissions that will fit the same as the 2060. I read somewhere that the 2070 would fit, but i want to make sure of this first since a local truck parts place has a few 2070's but no 2060's. Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/ Share on other sites More sharing options...
gicknordon Posted August 7, 2014 Author Share Posted August 7, 2014 Any body atleast have the spec sheets for these transmissions? Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-255343 Share on other sites More sharing options...
GreenGiant2 Posted August 8, 2014 Share Posted August 8, 2014 2080 should fit. But someone smarter than me could tell for sure Quote We the unwilling, Lead by the unqualified, are doing the impossible, for the ungrateful. Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-255383 Share on other sites More sharing options...
Superdog Posted August 8, 2014 Share Posted August 8, 2014 the 2060 has a .60 overdrive,so you'll want to replace it with either another 2060 or a 2070,most other trans.,Mack and Fuller have .71 to .86 overdrives,if you got one of them,you'd be geared too slow Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-255387 Share on other sites More sharing options...
gicknordon Posted August 8, 2014 Author Share Posted August 8, 2014 So a 2070 would definitely fit? Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-255451 Share on other sites More sharing options...
Superdog Posted August 8, 2014 Share Posted August 8, 2014 yes Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-255452 Share on other sites More sharing options...
gicknordon Posted August 18, 2014 Author Share Posted August 18, 2014 Just an update on this. It looks like some of the issues we were having were from a clutch going bad. We had another shop take a look and it looks like high gear was worn which was causing the main problem. They are gonna rebuild it. Quote Link to comment https://www.bigmacktrucks.com/topic/36588-transmission-specs-question/#findComment-256407 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.