docthrush Posted August 29, 2014 Share Posted August 29, 2014 Working with a two stage waterous pump on a cf 600. Is it ok to draft with the pump in pressure mode? My understanding was the best/right thing to do was to start the draft in volume mode then switch to pressure if needed?ThanksDoc 1 Quote Link to comment https://www.bigmacktrucks.com/topic/36872-drafting-in-pressure-mode/ Share on other sites More sharing options...
1958 F.W.D. Posted August 29, 2014 Share Posted August 29, 2014 Will not hurt it, however depending on your particular pump where the primer is mounted (which side of the volutes it's on), it may be more efficient to pull your draft in psi mode. And it goes without saying that if you are moving more than 1/2 of the pump's capacity you should be in volume mode. 1 Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/36872-drafting-in-pressure-mode/#findComment-257735 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.