b615rich Posted November 2, 2014 Share Posted November 2, 2014 I need one stainless radiator shutter for a B-75. They measure 29 1/4 in. By 2 in. There is a very thin strip of rubber on one side. I just need one, so hopefully someone has parted one out or has a partially damaged set. I don't need the whole assembly. Thank you.] Quote Link to comment Share on other sites More sharing options...
Superdog Posted November 2, 2014 Share Posted November 2, 2014 sure it isn't aluminum? Quote Link to comment Share on other sites More sharing options...
j hancock Posted November 2, 2014 Share Posted November 2, 2014 If Superdog doesn't have one, I might have one. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
b615rich Posted November 4, 2014 Author Share Posted November 4, 2014 Superdog and Jim, good question. Shiny on top like chrome, bottom dull like cast aluminum, magnet doesn't stick. I'd say aluminum based on the bottom, but little oxidation on top even without polishing. Magnets and stainless could go either way... With one missing, if it fits and it's shiny better than nothing, right? Has a rod on the left, one on the right plus a smaller second one to move with the actuator. Let me know what you may have please. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.