Popular Post 6368 Posted January 13, 2015 Author Popular Post Share Posted January 13, 2015 Progress has been slow lately. I got the tube out. i was playing around with it for a while and finally got annoyed enough to fire up the torch and just start cutting. Once i did that it took less than an hour and there was no damage to the casting which is what had me so timid. I was also pleased to get all of the pins out intact( after much rosebud work) as they are very pricey. the first spring shop guy told me i would never get them out. I only had to cut two lock collars. now i can't find new ones so a friend is going to make them for me. I am taking a trip to Jersey City tomorrow for the new trunnion tube. 3 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-274118 Share on other sites More sharing options...
6368 Posted January 14, 2015 Author Share Posted January 14, 2015 Google Jensen & Mitchel in Jersey City NJ get the phone # and call and ask for Charlie, he will get you the parts you need. There are still plenty of A-Cars runnin around down here with the Timken style setupBULLHUSKThanks for the tip. I took a ride out there today and picked up some of the parts i needed. He got me me a new tube and one decent used trunnion. Nice guy and super knowledgeable. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-274230 Share on other sites More sharing options...
bullhusk Posted January 14, 2015 Share Posted January 14, 2015 Thanks for the tip. I took a ride out there today and picked up some of the parts i needed. He got me me a new tube and one decent used trunnion. Nice guy and super knowledgeable.OK glad I could helpBULLHUSK Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-274235 Share on other sites More sharing options...
1958 F.W.D. Posted January 14, 2015 Share Posted January 14, 2015 Thanks for the tip. I took a ride out there today and picked up some of the parts i needed. He got me me a new tube and one decent used trunnion. Nice guy and super knowledgeable.That's why I love this board. Quote TWO STROKES ARE FOR GARDEN TOOLS Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-274248 Share on other sites More sharing options...
6368 Posted February 13, 2015 Author Share Posted February 13, 2015 Almost done now. but i don't i don't know what to put in the trunion for lube. i' am pretty sure it is some type of oil, but my end caps have had grease zerks installed by someone. they probably did this once the seals blew out. Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-278777 Share on other sites More sharing options...
Popular Post 6368 Posted February 19, 2015 Author Popular Post Share Posted February 19, 2015 Finally finished 4 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-279667 Share on other sites More sharing options...
Popular Post 6368 Posted February 19, 2015 Author Popular Post Share Posted February 19, 2015 5 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-279668 Share on other sites More sharing options...
thomastractorsvc Posted February 19, 2015 Share Posted February 19, 2015 Just like new, there you go. Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-279671 Share on other sites More sharing options...
j hancock Posted February 19, 2015 Share Posted February 19, 2015 Excellent! Keep that dog trucking down the road. Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-279678 Share on other sites More sharing options...
mrsmackpaul Posted February 19, 2015 Share Posted February 19, 2015 top job looks great to me Paul Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-279688 Share on other sites More sharing options...
Popular Post 6368 Posted April 18, 2015 Author Popular Post Share Posted April 18, 2015 Back to work. After many years of neglect as a "site truck" for the previous owner The brockway started hauling again on thursday. The rebuilt suspension works Great. 10 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287123 Share on other sites More sharing options...
keg1 Posted April 18, 2015 Share Posted April 18, 2015 Looks good back in the dirt Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287125 Share on other sites More sharing options...
j hancock Posted April 18, 2015 Share Posted April 18, 2015 Good Job! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287126 Share on other sites More sharing options...
mrsmackpaul Posted April 18, 2015 Share Posted April 18, 2015 well done mate must be a good feeling to have it all back together again and going good Paul Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287136 Share on other sites More sharing options...
dockmen027 Posted April 19, 2015 Share Posted April 19, 2015 Hopefully an original bumper will turn up for you, good job bringing her back. Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287239 Share on other sites More sharing options...
Popular Post Vladislav Posted April 19, 2015 Popular Post Share Posted April 19, 2015 Well done I went through the same story with my old Mack a couple years back although it wasn't so bad.I just machined the trunnion ends with a big lathe and fabricated new brass bushings. 5 Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287253 Share on other sites More sharing options...
Red Horse Posted April 21, 2015 Share Posted April 21, 2015 20150416_101712.jpg Back to work. After many years of neglect as a "site truck" for the previous owner The brockway started hauling again on thursday. The rebuilt suspension works Great. Well done-you should be very proud of your work.....but just where did you put the DEF tank? 2 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287442 Share on other sites More sharing options...
thomastractorsvc Posted April 21, 2015 Share Posted April 21, 2015 Looks good getting dirt..y! Quote Robert"I reject your reality and substitute my own." Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-287444 Share on other sites More sharing options...
Popular Post 6368 Posted August 15, 2015 Author Popular Post Share Posted August 15, 2015 1674 wasn't cutting it so decided to replace it with a 3406. Almost done now. If anybody knows the filter number for this style power steering res. i would appreciate it. 4 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-300182 Share on other sites More sharing options...
felicello122 Posted August 15, 2015 Share Posted August 15, 2015 You putting the air to air on it, looks good in there is it a 425hp or 400up? Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-300187 Share on other sites More sharing options...
Popular Post 6368 Posted August 15, 2015 Author Popular Post Share Posted August 15, 2015 it is a 3406c 425hp that came with air to air but i converted it to air to water because of space considerations. had to make a custom pipe to mate the bigger turbo to the manifold. 4 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-300191 Share on other sites More sharing options...
Jocko Posted August 18, 2015 Share Posted August 18, 2015 Nice project nice to see the old trucks working 2 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-300536 Share on other sites More sharing options...
j hancock Posted August 18, 2015 Share Posted August 18, 2015 Hmmmmm......more power ! Quote JimIt doesn't cost anything to pay attention. Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-300549 Share on other sites More sharing options...
felicello122 Posted August 22, 2015 Share Posted August 22, 2015 Should be at 400up, untill you set the pump and timing Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-301036 Share on other sites More sharing options...
6368 Posted October 5, 2015 Author Share Posted October 5, 2015 I got to drive it with new engine for the first time yesterday. I' am pleased ...now i just need to get a rtoo 13spd. 52 mph tops those old 1674 wound a little higher. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37655-brockway-progress/page/3/#findComment-306283 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.