Popular Post Wobblin-Goblin Posted December 22, 2014 Author Popular Post Share Posted December 22, 2014 Today's progress:1. Took off the right front tire/rim. Prepped and painted the rim, spokes, center cap, clips, and nuts. Once dry, put it all back on the truck.2. While the tire was off, we replaced the brake line to that wheel, which was rubbing on the tire. Brand-new line is a little shorter to keep it from rubbing again.Tomorrow, I plan on pulling off all the stuff from the fenders (directional, mirror bases, etc.) and the bumper to get the fenders and bumper ready for prep and paint. Hopefully we can have them painted by the end of next week.I'm really enjoying having this project to do. I'm doing things I've never done before and learning a lot in the process. 5 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271378 Share on other sites More sharing options...
220cummins Posted December 23, 2014 Share Posted December 23, 2014 Looks good so far! I'd allow some extra time to pull off, repair, paint, and reinstall the fenders.... You never know what you're going to run into. lol The b model fenders don't always come apart real easy especially after being attached for some many years. Best of luck! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271425 Share on other sites More sharing options...
Wobblin-Goblin Posted December 23, 2014 Author Share Posted December 23, 2014 I took the bumper off today. That wasn't the easiest job I've ever had, I can tell you that. As you can see, it's beat up quite a bit, so it had to be straightened out a little bit. My uncle and I spent about an hour or two with a 100 ton press, a sledge hammer, and a 5' iron bar "straightening the curves and flattening the hills." By the time we quit for the day, we had it looking A LOT better. Not perfect, of course, but much better.I also took everything off the fenders: directional lights, mirror bases, and the bolts that held the fender extenders. The fenders are now ready for prep.There are no new pictures because I forgot the camera at the garage, but tomorrow I'll post a bunch. I think there's a chance both the bumper and the fenders will be completely done by the end of next week. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271523 Share on other sites More sharing options...
carlotpilot Posted December 23, 2014 Share Posted December 23, 2014 have you figured out front page yet? Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271524 Share on other sites More sharing options...
Wobblin-Goblin Posted December 24, 2014 Author Share Posted December 24, 2014 I guess so. You're referring to the magazine that was posted last page...right? Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271539 Share on other sites More sharing options...
Popular Post Wobblin-Goblin Posted December 24, 2014 Author Popular Post Share Posted December 24, 2014 Got a few pics for y'all today.Today we finished straightening the bumper and then cut off the bent foot holds (steps) that were under the bumper. I also stripped, prepped, primed, and painted the push plate, its arms/supports, and the tow hooks.The first two pics are of the truck from earlier in the project, to show how bent up the bumper was. It was in pretty rough shape (bent, twisted, dented all over, etc.). The next pic is of the truck with the bumper, directional lights, and mirror bases off. After that is the truck with the straightened bumper back on (for photo only, not bolted on). The next pic is of the push plate and stuff painted. The last pic is of my B61's stable mate for the time being. 9 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271657 Share on other sites More sharing options...
Vladislav Posted December 24, 2014 Share Posted December 24, 2014 That's relly nice looking beast Best of luck with it! Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271660 Share on other sites More sharing options...
Superdog Posted December 24, 2014 Share Posted December 24, 2014 your making good progress Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271680 Share on other sites More sharing options...
HarryS Posted December 25, 2014 Share Posted December 25, 2014 Good job on the bumper. Like the stable mate. Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-271683 Share on other sites More sharing options...
Wobblin-Goblin Posted December 27, 2014 Author Share Posted December 27, 2014 The shop that I've been doing all the work to my Mack has been closed since Wednesday, so when I left for the day, I brought the bumper with me. Today I stripped it down to metal and tomorrow plan on painting it. This should allow us to start right on the fenders Monday morning. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272050 Share on other sites More sharing options...
Popular Post Wobblin-Goblin Posted December 30, 2014 Author Popular Post Share Posted December 30, 2014 Been a long day.Today we:1. Made new foot step stirrups for the bumper and welded them on.2. Primed and painted the bumper.3. Did body work on the fenders, then primed most of them. Had to do some welding, but overall not too much.At the end of the day, we put the painted bumper on the truck just to take another picture.BTW, the plan is to put Maxis on the truck in the next two or three weeks and then register it. 6 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272325 Share on other sites More sharing options...
NY-B61 Posted December 30, 2014 Share Posted December 30, 2014 Great job and fun to watch your progress! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272353 Share on other sites More sharing options...
gearhead204 Posted December 30, 2014 Share Posted December 30, 2014 mater otta be happy to have such a good home btw nice job with the bumper, looking good 2 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272365 Share on other sites More sharing options...
Popular Post Wobblin-Goblin Posted December 30, 2014 Author Popular Post Share Posted December 30, 2014 I'm happy to have had the opportunity to buy 'Mater from DBLEW.As I said in my first post, this isn't a restoration, more like a thorough refurb job. I simply don't have the money or time for a restoration. Besides, we're planning on using this truck on our farm. 6 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272373 Share on other sites More sharing options...
Popular Post Superdog Posted December 30, 2014 Popular Post Share Posted December 30, 2014 ain't it nice to have sheet metal you can actually weld? not like the foil thin crap they use today that wraps if you hold a match too close. 4 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272385 Share on other sites More sharing options...
richard-b61 Posted December 30, 2014 Share Posted December 30, 2014 Congrats, I wanted a B model for years and years, and finally got one about 18 months ago, love it. The restore takes time (about 1/2 way done) and more money than I expected, but I love my B61. I grew up with Mack's, have it in my blood. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272437 Share on other sites More sharing options...
mrsmackpaul Posted December 30, 2014 Share Posted December 30, 2014 The restore takes time (about 1/2 way done) and more money than I expected, but I love my B61. Never a truer word has been typed Paul Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272444 Share on other sites More sharing options...
Popular Post Wobblin-Goblin Posted December 30, 2014 Author Popular Post Share Posted December 30, 2014 Today's progress:1. Pulled a couple dents out of the headlight panel that wasn't prepped yesterday.2. Prepped and primed that panel.3. Finished prepping and priming the rest of the fenders and their removal top pieces.4. Cleaned and painted the frame/bumper mounts.5. Started sanding/prepping the radiator cover. It's a shame that it is rusted so badly on top (next to where the Mack Bulldog goes), because most of the rest of the cover is nice, shiny steel that could be clear coated and otherwise left as-is. It's a beautiful sheen.The plan is to paint the fenders tomorrow and if time allows, the radiator cover as well. If it doesn't work out, the cover should be painted on Friday.Sorry, no pics today, but I'll certainly have a few tomorrow after we paint!Thanks for following my project, everybody. 7 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272471 Share on other sites More sharing options...
james j neiweem Posted December 31, 2014 Share Posted December 31, 2014 Mater would look good in former Celli trucking company colors out of northern Illinois. Grey cab, green fenders and red striping. There are some pictures here on site under ChicagoMacks (57 BCR-AL). Wish you continued success. Glad to see that it is going to be a working truck again. Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272533 Share on other sites More sharing options...
dblew Posted December 31, 2014 Share Posted December 31, 2014 The fenders and bumper look AMAZING!....and I'm not gonna lie, I love that people are still calling him 'Mater! LOL! 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272551 Share on other sites More sharing options...
Green Dash Posted December 31, 2014 Share Posted December 31, 2014 You're zipping right through this. Thanks for sharing your pics as you go. Quote Jim Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272564 Share on other sites More sharing options...
Popular Post Wobblin-Goblin Posted December 31, 2014 Author Popular Post Share Posted December 31, 2014 Here you go, folks. Pics of the painted fenders. They look absolutely gorgeous.The radiator cover is also primed and ready for metallic silver paint on Friday. After that, the bumper gets put on permanently along with the push plate. 9 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272589 Share on other sites More sharing options...
2stacksuperdog Posted December 31, 2014 Share Posted December 31, 2014 Looks like this will be done in time for the Brooklyn Truck show. 2 Quote Matt Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272591 Share on other sites More sharing options...
1957B61Vt Posted December 31, 2014 Share Posted December 31, 2014 Looking. Good!Keep up the good work And keep the pics cominI look everyday . After workMater cleaning up good .Steve 1 Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272594 Share on other sites More sharing options...
keg1 Posted December 31, 2014 Share Posted December 31, 2014 Looking good. Your moving right along with it. Quote Link to comment https://www.bigmacktrucks.com/topic/37801-finally-did-it-i-now-own-a-mack/page/5/#findComment-272601 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.