WANT TO BUY Aluminum battery box cover

[Coenut]

Looking for 2 battery box covers. Truck is an f model coe.

[PRICE'SHEAVYDUTYTOWING]

if you run across some, even a steel set, im in need of a set for my 72.

[Coenut]

The guy I bought truck from says he has 2 new covers. If he comes through I will send you my steel set.

[kscarbel2]

The Allentown-produced Mack F-model was offered with black painted steel or chrome steel battery box covers, but never aluminum.

However having said that, the MH/RWI aluminum battery box covers (32MK4195M) can be directly fitted to F and R/U/DM models. If you want bright finish, then 32MK4195M2.

[ws721]

The Allentown-produced Mack F-model was offered with black painted steel or chrome steel battery box covers, but never aluminum.

However having said that, the MH/RWI aluminum battery box covers (32MK4195M) can be directly fitted to F and R/U/DM models. If you want bright finish, then 32MK4195M2.

Ok you know your battery box covers. What battery box cover fits a Cruiseliner? R model covers wont fit, not long enough.

[kscarbel2]

Mack Cruise-Liners, and Hayward-produced Super-Liners, used a 32MK39306A aluminum battery box cover (Note the 5-digit Mack Western part number, unlike Mack part numbers for east coast models).

Unlike other Mack battery box covers, these had a locating pin at the front bottom of the cover.

If I recall correctly, the polished version was 32MK39306AP3.

[ws721]

Awesome! Thank you

[Superdog]

Mack Cruise-Liners, and Hayward-produced Super-Liners, used a 32MK39306A aluminum battery box cover (Note the 5-digit Mack Western part number, unlike Mack part numbers for east coast models).

Unlike other Mack battery box covers, these had a locating pin at the front bottom of the cover.

If I recall correctly, the polished version was 32MK39306AP3.

They must be still available,but not cheap. Local Mack dealer called me about a month ago looking for one. Seems that one of their technicians was forced to work on an old Valueliner and had to jump start it to get it in the shop. He forgot to pick the lid up and ran over it. I told them $100 for a good used one,the owner threw a fit and said he'd find one cheaper. I talked to the shop foreman a week later and he told me they had to order a new one,$500 dealer cost.

[Maddog13407]

weren't those the junk covers Mike that didn't have a lip in the back and you couldn't stand on without the cover fallin off and you falling on your ass? had the generic latch on the front, not the rubber strap?

[Superdog]

yep,had they metal spring loaded latch that didn't last 6 months,don't think I've seen too many that didn't have a tarp strap holding the lid on