excavator Posted December 11, 2014 Share Posted December 11, 2014 (edited) Anyone know about the e6 engines that were in a RM model? I just bought a nice e6 that was in a RM model that I am installing in a R Model and they had oil pan sump in front to clear 4x4 axle. My thinking as I am looking at this is that the oil pan can be reversed and I will pull the pan today to find out and then I woill have to check to see if the oil pump pick up tube can also be mounted on the other side of the pump. I figure some one might have some info on the front sump setups.thanks Jim Edited December 11, 2014 by excavator Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted December 11, 2014 Share Posted December 11, 2014 I've never had to do it but I'm sure it can be done.The oil pan is symmetrical and can be mounted either way.The oil pump has two inlet flanges, the one that's not used is covered by a blank plate.Ron Quote Link to comment Share on other sites More sharing options...
blackdog2 Posted December 11, 2014 Share Posted December 11, 2014 Yup it can be done! Quote Ed Link to comment Share on other sites More sharing options...
excavator Posted December 11, 2014 Author Share Posted December 11, 2014 (edited) thanks guys, did it today and installed new o-ring on pick up and new gasket on cover and pan gasket and everything worked great Edited December 11, 2014 by excavator 1 Quote Link to comment Share on other sites More sharing options...
carlotpilot Posted December 11, 2014 Share Posted December 11, 2014 damn somthin worked right for a change 1 Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted December 12, 2014 Share Posted December 12, 2014 just for a note this does not work with the e-9...... it takes a different pan. 1 Quote Link to comment Share on other sites More sharing options...
excavator Posted December 12, 2014 Author Share Posted December 12, 2014 Thanks, now I just need a new air cleaner with the 2 outlets and some piping to the turbo and tip turbine Quote Link to comment Share on other sites More sharing options...
Popular Post excavator Posted December 14, 2014 Author Popular Post Share Posted December 14, 2014 (edited) I am installing this e6m in my 1973 r model that has a tired 237 Edited December 14, 2014 by excavator 3 Quote Link to comment Share on other sites More sharing options...
masterwelder Posted December 14, 2014 Share Posted December 14, 2014 That will be a nice upgrade. Quote Link to comment Share on other sites More sharing options...
excavator Posted December 16, 2014 Author Share Posted December 16, 2014 Had to post this 1 Quote Link to comment Share on other sites More sharing options...
Joe Ditchkus Posted December 18, 2014 Share Posted December 18, 2014 Nice load in the Ford and its not even squatting. Joe D. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.