ritchie0317 Posted December 16, 2014 Share Posted December 16, 2014 I converted an 01 CH to a dump truck and when the sleeper was removed, the cab lights and visor were also removed since it was attached. I've bought a new sun visor (not chrome, of course) but looks difficult to put on since there are no pre-set holes to screw it into. Plus, the can lights also look tricky since there's only one wire hanging off from where it was connected to sleeper lights. There's rubber pieces from where it looks like the lights go but no wires. Any advice will really help on how to get this done. Thanks Quote Link to comment https://www.bigmacktrucks.com/topic/38120-01-ch-cab-lights-installation-and-sun-visor/ Share on other sites More sharing options...
felicello122 Posted December 17, 2014 Share Posted December 17, 2014 Get yourself a nut insert tool,puts a 1/4 blind nut in the cab then you thread the bolt in tight, napa sells the kit is fairly cheap, as for the lights you can do the same thing and feed the lights to that one wire with 1 wire running across.when you do the visor lay it on the cab and mark your holes and drill,same for lights Quote Link to comment https://www.bigmacktrucks.com/topic/38120-01-ch-cab-lights-installation-and-sun-visor/#findComment-270690 Share on other sites More sharing options...
ritchie0317 Posted December 17, 2014 Author Share Posted December 17, 2014 Awesome!!! I'll give it a try and post pics. Thanks.l!! Quote Link to comment https://www.bigmacktrucks.com/topic/38120-01-ch-cab-lights-installation-and-sun-visor/#findComment-270702 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.