Lmackattack Posted September 20, 2005 Share Posted September 20, 2005 I dont have any tow hooks on my RS700 and might need some if I start to work the truck part time in construction. I have seen some people cut out the bumper near the frame rails to fit them. is there any way to make a brace from rail to rail and use the hole in the middle of the bumper (where you stand to open hood) i am not willing to cut up this perfect pumper. so I eather need to get a diffrent one or attache them where holes are already located. Quote Link to comment https://www.bigmacktrucks.com/topic/382-front-of-truck-tow-hooks/ Share on other sites More sharing options...
Barry Posted September 20, 2005 Share Posted September 20, 2005 Alot of R-Mods had the tow loops built right into the front spring hangers...check and see if they are there. If so, you may just need a bumper extender or a bumper with holes in it. Quote Barry - Watt's Truck Center Parts Manager and BMT Webmaster...1-888-304-MACK Link to comment https://www.bigmacktrucks.com/topic/382-front-of-truck-tow-hooks/#findComment-1703 Share on other sites More sharing options...
roadusercharges Posted September 21, 2005 Share Posted September 21, 2005 Trent; Ive got an 3/8 thick alloy bumper, which has the bolts that hold it to the chassis lengthened and 2 sets of steel jaws attached with a drop pin, 1 each side, Its very useful when tying on to the roll on roll off ships. They dont destroy the bumper and can be taken off and the bumper still looks original. Have a look on my album.Nigel Quote Link to comment https://www.bigmacktrucks.com/topic/382-front-of-truck-tow-hooks/#findComment-1708 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.